VIEW MY

mrjofus1959

Gift Premium Subscription To mrjofus1959

Join Date:

08-13-2012

Last Activity:

08-18-2014 4:10 PM

Likes Given: 6

6 Likes on 6 Posts 

    ABOUT ME

  • Married
  • Fort Collins
  • CO

LATEST ACTIVITY

  • Posted in thread: Copper-in-PVC Counterflow Chiller on 06-18-2014 at 03:56 AM
    Yeah, the whole point of having straight cooling runs is so you can run a brush through once in
    a while to be absolutely sure it's clean. The copper U shapes don't afford that so the silicone
    only loo...

  • Posted in thread: Copper-in-PVC Counterflow Chiller on 06-18-2014 at 03:55 AM
    On the suction collapsing the silicone: Did you ever try the chiller on the outlet side of the
    pump?Nope I didn't try that. At the time all I was thinking about was pulling through the
    chiller to keep...

  • Posted in thread: Copper-in-PVC Counterflow Chiller on 06-13-2014 at 11:56 AM
    I should probably add another comment... My first iteration using silicone tubing only for the
    loops on the end of the chiller, and as you can see in these last two photos I switched to
    copper and sil...

  • Posted in thread: Copper-in-PVC Counterflow Chiller on 06-13-2014 at 12:02 AM
    MPT for male pipe thread. The compression fittings I used are brass, 5/8" compression on one
    side (I used o-rings instead of the ferrules) and 3/4" MPT on the other. Those are threaded
    into 3/4" FPT b...

  • Posted in thread: Copper-in-PVC Counterflow Chiller on 06-12-2014 at 12:24 AM
    Awesome build, I dig it! I really want to put something like this together - just a bit smaller
    so I can mount it under the counter where I brew. I'm currently using a copper-inside-hose
    chiller which...

  • Posted in thread: Spike Brewing 12.5 Gallon Conical Fermenter Giveaway! on 01-06-2014 at 12:55 PM
    In...

  • Posted in thread: Sanke Keg Washer build on 01-02-2014 at 05:55 PM
    I was originally worried about the volume of half barrel kegs with the 10g reservoirs but as it
    turns out there were no issues. That pump rocks, I haven't had any issues with washing pairs of
    kegs vs....

  • Posted in thread: Sanke Keg Washer build on 01-02-2014 at 04:19 PM
    Nice build KBVC!marcb - With the tees in place and washing two sixtels at a time, have you seen
    any issues at all versus washing just one keg? Are both kegs staying at 170F during the wash
    cycle? And ...

  • Posted in thread: Sanke Keg Washer build on 01-01-2014 at 07:14 PM
    Very nice build marcb!!! We hope to open a micro by the end of the year, and while there won't
    be much time for me to build rather than buy, I'm pretty sure that this will be one thing I
    build!!! Than...

  • Posted in thread: 15 Gal Blichmann False Bottom Diameter? on 12-29-2013 at 03:36 PM
    Here are a couple of pics of the standoffs I added...168779168780

0 COMMENTS
POST A COMMENT