Last Activity:06-11-2014 11:00 AM
Likes Given: 6
Posted in thread: Change a line from a homebrew tap to standard? on 05-06-2014 at 02:35 PM
If you're planning on switching back and forth, these are nice to have: you don't have to
have to deal with switching the line when you want to go from sanke to corny. Just don't forget
Posted in thread: Change a line from a homebrew tap to standard? on 05-05-2014 at 05:55 PM
my advice get a couple and unhook you ball/pin lock connector and see how the tubes fit. 3/16
is what I use on both commerical and homebrew kegs' liquid lines.would this style work?
Posted in thread: Change a line from a homebrew tap to standard? on 05-05-2014 at 02:00 PM
a sankey coupler. Thats really it, depending on hose size. have the beverage Tubing - 3/16"
Posted in thread: Change a line from a homebrew tap to standard? on 05-05-2014 at 12:59 PM
I have two lines setup for Corny kegs on my Keezer. What do I need to do to change one of those
over to a standard keg?
Posted in thread: Need help. Homebrew to Commercial change on 12-13-2013 at 01:25 AM
I have two taps currently setup for homebrew ball lock kegs. What do I have to do/get to switch
one to a commercial keg when I want to get one?
Posted in thread: Show us your Kegerator on 03-10-2013 at 07:30 PM
New beer on tap in the Keezer!106603
Posted in thread: Show us your Kegerator on 01-04-2013 at 03:01 PM
Here's mine! Just finished - testing temp now and connecting Kegs this weekend!
Posted in thread: Johnson Control / Keezer Optimal Temp Setup? on 01-04-2013 at 02:31 PM
I like 37 with a 5 degree diff and my temperature probe in the center of the keezer. I've tried
tweaking the probe position and differentials, but I find that one is a nice mix of not turning
Posted in thread: Johnson Control / Keezer Optimal Temp Setup? on 01-04-2013 at 01:57 PM
What are folks using for a range and Dif on setup with their Johnson Controls for their Keezer
for standard Ales and what not? Not going to be lagering anytime soon in the Keezer.Thanks!
Posted in thread: Building my first keezer, need parts. on 12-28-2012 at 03:16 PM
Hey man, looking good! I'm almost at the same point as you but am hung up on how to attach the
collar. Howd you go about it? from the home depot. Worked very well and its very solid.