Last Activity:03-22-2012 9:20 PM
Posted in thread: Primary fermentation in corny keg on 01-03-2012 at 04:36 AM
High_Noonan,Happy to hear that you are thinking about pressure fermenting now, it's a blast. I
fill up the corny to the welded seam with wort, which I believe is the 5 gallon point, add
10-20 drops fe...
Posted in thread: New kegerator smells like CO2..do I have a leak? on 08-31-2011 at 01:14 AM
How would I test for leaks on the posts of the kegs themselves? Just disconnect the hoses and
spray with soapy water? Or would that not test the o-rings seal?I just washed the inside of my
Posted in thread: Kenmore 5 cu ft keezer on 06-20-2011 at 12:27 AM
I posted a bit of a build thread here:
Posted in thread: Frozen keg? on 05-30-2011 at 02:32 AM
UPDATE - Keg wasn't frozen. The dip tube seems to have been aligned poorly such that it was up
against the bottom of the keg rather than down in the little "trough". I made a pin-lock socket
Posted in thread: Carboy/ Keg Cleaner Giveaway on 05-28-2011 at 04:37 PM
Looks pretty neat... wonder if you could put a hole through a bucket lid and clean those with
Posted in thread: Frozen keg? on 05-26-2011 at 08:56 PM
I have ball locks so I'm not overly sure, but maybe swap the connector from your gas line to
your co2 line if they are not interchangable?Hm, I think KegConnection advertises that they
have quick disc...
Posted in thread: Frozen keg? on 05-26-2011 at 08:52 PM
I would bet you have some gunk clogging the pick up tube. Try realsing the pressure and then
running some CO2 through the outlet. It should knock clear any gunk that got stuck in teh tube.
Posted in thread: Frozen keg? on 05-26-2011 at 06:55 PM
Are you sure CO2 is actually getting into the keg ? If you have a pressure release valve and
pull it, does CO2 comes out as it should, with a nice pssshht ?On one of my kegs, the gas
poppet will not m...
Posted in thread: Frozen keg? on 05-26-2011 at 06:35 PM
I just finished my keezer and moved an ESB I've been aging for awhile (really didn't want to
bottle it...) into a keg and threw it in the keezer to chill and then put it some gas. In the
meantime, I w...
Posted in thread: First time kegging - slightly overwhelmed by info on 05-26-2011 at 06:01 PM
The cold setting is usually lower than the lowest temp you would serve beer so don't worry
about it.As for the bottled beer, get it very very cold, open them and transfer them to the keg
by running it...