Last Activity:08-19-2014 10:16 AM
Posted in thread: Get a Real Temp Gauge....Yikes on 12-28-2013 at 05:51 PM
Thanks...I've seriously taken the approach of "It's just beer, mate" In other words, I'm not
overly concerned at this point! Wife and daughter are out of town for a couple days, I'm gonna
brew two bat...
Posted in thread: Get a Real Temp Gauge....Yikes on 12-28-2013 at 05:16 PM
I was using a oven digital temp. gauge until my father in law came over to help with one of my
all grain batches. He told me I was crazy and gave me a 5 reader thermacouple (digital). I just
Posted in thread: New System Test on 12-10-2013 at 12:51 AM
Thanks guys. I hooked it up at noon, applied 22lbs. At 5pm it dropped to 20lbs on the
regulator. Hit the corny with soapy water and found a leaky pressure release valve.
Disassembled, cleaned, reassem...
Posted in thread: New System Test on 12-09-2013 at 11:30 AM
First time kegger here. I've got a new to me system. I'm wondering, if I take an empty keg and
run the pressure to 20 PSI, turn the gas off and monitor the pressure gauge on the regulator
for 24 hours...
Posted in thread: 5lb Steel CO2 tank w/ regulator : Lancaster on 11-23-2013 at 02:22 PM
Interested in one of the extra regulators if you stumble upon one. Live in sc so would need it
shipped. Thanks, marc
Posted in thread: First Shot at All Grain might be a bust on 11-05-2013 at 12:46 PM
Thank you guys! I don't think I stirred good enough. I'll keep plugging away at, making small
changes in the process to see if that increase eff. That being said, made a rookie mistake and
Posted in thread: First Shot at All Grain might be a bust on 11-04-2013 at 01:30 PM
Here are the design and mash pages. I started with 3.75 gallons, then put in 4.75 gallons to
sparge with all at once. Thanks for your help.
Posted in thread: First Shot at All Grain might be a bust on 11-04-2013 at 11:28 AM
Here is the screen shot from beersmith....
Posted in thread: First Shot at All Grain might be a bust on 11-04-2013 at 11:24 AM
Hi Guys: Just got into brewing beer a couple months ago after making wine for a couple years.
Anyway, started out with a couple extract brews, built rest of equipment and then decided to
get into all ...
Posted in thread: Johnson Temp Controller on 10-20-2013 at 10:00 PM
Found one Locally...Sorry for late reply. Thank you to both of you for responding and sorry for
the late reply. Thanks, Marc