Gift Premium Subscription To mrcleanwell

Join Date:


Last Activity:

10-23-2011 11:08 PM


  • Female
  • Single


  • Posted in thread: Wort Processors Logo Contest on 02-09-2009 at 06:14 PM
    I've never used it but you might want to take a look at describe what you are looking for and
    how much you are willing to pay, then a number of freelance artists create designs for you. You
    select t...

  • Posted in thread: Bulkhead - Weldless vs Welded on 02-09-2009 at 06:53 AM
    Other than cost, are there any cons to using a weldless bulkhead in a converted keggle? I may
    know someone that could do the welding but if there is no downside, I would rather just install
    a weldless...

  • Posted in thread: Blue Spade Brewing on 02-04-2009 at 04:52 AM
    thanks for the feedback guys, now I just need to stop being lazy and design the actual label.

  • Posted in thread: Blue Spade Brewing on 02-01-2009 at 09:18 PM
    Here are a few logos I drew up using Inkscape:This will go on the neck label...if I'm ever
    motivated enough to create one. will be on the main label, the name of beer will obviously
    change each batch...

  • Posted in thread: Inkscape/Gimp Question on 01-15-2009 at 04:33 AM
    Thanks for the advice. I finally figured out that you can "export" a file as a png from
    Inkscape. Here's what I was working on:

  • Posted in thread: Inkscape/Gimp Question on 01-11-2009 at 08:20 PM
    I'm currently drawing up a logo using Inkscape. I then want to use The Gimp to combine all the
    pieces and tweak it. I used Inkscape to add text to one of the pieces. However when I open that
    part in G...

  • Posted in thread: Bayou Classic Double/Triple Burner Stands on 11-18-2008 at 08:10 AM
    Anyone use the Double or Triple burner stands from Bayou Classic? It seems like purchasing
    these would be much cheaper than building your own. It says they can bring 2 (3 for the triple
    burner) 60 qt ...

  • Posted in thread: Cheap & Easy 10 Gallon Rubbermaid MLT Conversion on 08-27-2008 at 03:25 AM
    I just built a 10 gal MLT but am concerned about sanitation. It's not leaking, but due to the
    radius of the cooler, there is a very tiny gap between the washer and the inside of the
    cooler.Is this nor...

  • Posted in thread: Moving to All Grain on 08-26-2008 at 10:29 PM
    Thanks for the quick responses!

  • Posted in thread: Moving to All Grain on 08-26-2008 at 10:02 PM
    So after a few successful extract brews, I've decided it is time to move to all grain. I plan
    on starting off with a 5 gallon batch and eventually up to 10 gal. I'm about to put together a
    MLT and was...