Last Activity:11-22-2014 4:29 PM
4 Likes on 3 Posts
Posted in thread: Melted 40Amp FOTEK SSR on 09-21-2014 at 01:45 AM
[QUOTE=augiedoggy;6386577]I'm all for sharing experiences but you "just" switched to auber
ssr's according to your posts? A little quick to be making assumptions dont you think?QUOTE]An
assumption is ...
Posted in thread: Melted 40Amp FOTEK SSR on 09-20-2014 at 09:43 PM
I hadn't thought to check that......the SSRs are mounted with the heatsinks to the enclosure. I
have a good ground at the chassis, and the mounting method is the same as it was previously. It
was not ...
Posted in thread: Melted 40Amp FOTEK SSR on 09-20-2014 at 09:03 PM
- 5500w HLT- 4500w BK- 8ga to the CB- 10ga from the CB- 8 or 10ga to the elements(I was able to
get a deal on 8ga)- 25amp CB- SSRs are wired between CB and Contactors - SSRs are mounted to
Posted in thread: Melted 40Amp FOTEK SSR on 09-20-2014 at 05:44 PM
Before I built my 50 Amp e-HERMS panel, I spent a lot of time looking at designs that were
posted on this sight, particularly PJs. I thought using circuit breakers within the panel, as
well as contact...
Posted in thread: Counterflow Chiller - 25ft 3/8" on 09-19-2014 at 12:10 PM
PM sent with contact info
Posted in thread: Counterflow Chiller - 25ft 3/8" on 09-14-2014 at 02:38 PM
I used it for 6 gallon batches, and also used it when I stepped up to 12 gallon batches. It did
well on gravity, as well as when I used a pump. I just wanted to get it done faster. I was able
to pick ...
Posted in thread: Hoffman 16x14x6 on 09-13-2014 at 07:55 PM
Getting rid of a spare 1614CH Hoffman model 1614CH box - NEMA 12, screw clamps and a continuous
hinge. There are some small surface scratches on the front that are hard to see in the picture.
It does ...
Posted in thread: Counterflow Chiller - 25ft 3/8" on 09-13-2014 at 07:05 PM
This CFC was used for a year, until I started brewing larger batches and decided to upgrade.
Goodyear high temp hose and a ball valve to regulate the cooling water.Located in Arlington$55
Posted in thread: show us all your fermentation closets/chambers here on 08-02-2014 at 04:33 PM
I picked up a Delfield Frost Top from a restaurant that was going out of business for $6.47
from an online auction...and built the cabinet around it.I have an ambient air temp sensor and
a sensor tape...
Posted in thread: Want to pass along my home brew equipment on 06-08-2014 at 01:59 PM
Mike, Sent a PM on the kegs....I am local...East Falls Church.Chris