Last Activity:04-05-2016 6:51 PM
Likes Given: 8
10 Likes on 6 Posts
Posted in thread: Questions about my fermentor build on 02-17-2016 at 08:11 PM
All good.. I guess this is a good example as to why I should do a build thread. ;) The AC side
and back third of the cabinet is open to vent into the garage..
Posted in thread: Questions about my fermentor build on 02-17-2016 at 07:31 PM
An air conditioner is just a heat pump, all it can do is move heat from the evaporator to the
condenser... in the above image the condenser is located within the cabinet. So all the heat
removed from ...
Posted in thread: show us all your fermentation closets/chambers here on 02-17-2016 at 07:14 PM
@ boochuckles - My apologies for not replying sooner, I didn't see this... It is 35" high, 25"
deep, and 6' wide... Insulation on the top and bottom is 3" thick. The rest is all 2". The
countertop is ...
Posted in thread: show us all your fermentation closets/chambers here on 07-02-2015 at 03:01 PM
Here's my mostly finished chamber... Inside has 2" of foam. Still need to make better sealing
doors. 6000BTU AC is usually set to 64 degrees, but it can easily cool to fridge temps in my
Posted in thread: 1 bowl or 2 ?? That is the Question on 06-10-2015 at 05:05 PM
I went with one large sink. It can easily hold anything I am cleaning..
Posted in thread: Show us your panel on 06-03-2015 at 04:56 PM
My panel is built in an old PC chassis that was originally used for HVAC control. it has 2
PID's and a timer, but is wired to replace the timer with another PID if needed. The red
switches control ele...