Last Activity:01-31-2014 3:15 PM
Likes Given: 2
Posted in thread: Lines & Temperature problems with Nostalgia Electrics KRS-2150 Kegorator on 07-02-2013 at 10:08 PM
So I managed to replace my lines for this kegerator. It was much more difficult than I
expected, so here's a few tips for anyone looking to do something similar:1. Those funny
looking tools i.e. keg w...
Posted in thread: Lines & Temperature problems with Nostalgia Electrics KRS-2150 Kegorator on 04-08-2013 at 06:07 PM
I've got a "Nostalgia Electrics KRS-2150 Kegorator". It has two issues I would like to fix, it
doesn't get cold enough, and the CO2 lines are too short. Returning it is not an option. With
Posted in thread: Typical Kegging Experience on 04-05-2013 at 06:03 AM
I probably do have lines which are too short. I believe they are about 5 feet. As far as one
tank of CO2 goes that is correct. I don't have leaks, I check with soapy water. What I do have
is a bottom ...
Posted in thread: Typical Kegging Experience on 04-04-2013 at 05:50 PM
I just wanted to share my experience with my second time kegging, without any specific
question. I filled my keg on a Thursday night, only to discover I was out of CO2. I went and
got some gas on Frid...
Posted in thread: Leaking regulator, very confused on 02-13-2013 at 04:50 AM
Yes your wisdom is probably correct, it would have made sense just to send it back and get a
new one. Regardless I got so frustrated with the quality of this thing that I already bought a
Posted in thread: Leaking regulator, very confused on 02-13-2013 at 02:25 AM
Okay so I tried the procedure you linked to, repeated here:1. Do this outside!!!2. Disconnect
the line going from the regulator to the keg.3. With the CO2 tank valve closed, turn the adjust
screw in a...
Posted in thread: Leaking regulator, very confused on 02-12-2013 at 06:08 PM
Okay I'll try the procedure when I get home tonight, and report results.Can I at least confirm
that this is not supposed to happen normally when there's nothing attached? Even if the red
Posted in thread: Leaking regulator, very confused on 02-12-2013 at 05:40 PM
I unscrewed the PRV to see if there was anything visible clogging the valve preventing it from
closing. There was nothing (which is what you would expect since this is brand new). It does
look like th...
Posted in thread: Leaking regulator, very confused on 02-12-2013 at 06:46 AM
I just got my CO2 tank filled for the first time. The guy who filled it tested out the
regulator and said it was broken. When the knob on the CO2 tank was opened, gas would leak out
of the blow off va...