MizooBrew

Gift Premium Subscription To MizooBrew

Join Date:

07-13-2011

Last Activity:

11-03-2012 11:38 AM

Likes Given: 1

    ABOUT ME

  • Single
  • Missoula
  • MT

LATEST ACTIVITY

  • Posted in thread: Proposed Alfalfa Honey Rye recipe on 10-11-2012 at 02:50 PM
    Looks pretty straight forward to me. How did it go? Go Cats!Lol I should update my location,
    I'm actually in school in Bozeman.As for the beer, it turned out pretty good but it wasn't my
    favorite thin...

  • Posted in thread: Kegerator pouring mostly foam on 10-03-2012 at 06:00 PM
    3/16" should be fine. Like Bobby_M said, 10 days is not necessarily going to be enough. If
    you've got a lot of particulate matter in suspension especially, you might just need to give
    the whole system...

  • Posted in thread: Kegerator pouring mostly foam on 10-03-2012 at 01:36 PM
    Just checked on that and from what I ordered I can say that I do have 3/16" ID tubing. So its
    not my serving line diameter, correct?

  • Posted in thread: Kegerator pouring mostly foam on 10-03-2012 at 03:08 AM
    I'm actually drinking one of these beers now, and it seems like after the excessive head has
    fallen it is actually undercarbonated... is it possible that my serving pressure should be
    decreased so tha...

  • Posted in thread: Kegerator pouring mostly foam on 10-03-2012 at 03:05 AM
    The manifold shouldn't change anything.At this point, you just need to check for all the usual
    suspects. Make sure the beer is cold, make sure it's had time to carb up, make sure your
    regulator is acc...

  • Posted in thread: Kegerator pouring mostly foam on 10-02-2012 at 11:41 PM
    I misspoke (mistyped?)- my serving lines are 5 feet long. Same length as on my previous
    setup.It was serving just fine on my previous keg, which was carbonated before I switched to
    the three way co2 m...

  • Posted in thread: Kegerator pouring mostly foam on 10-02-2012 at 11:30 PM
    I recently converted by one tap kegerator to a three tap, and have been having trouble with
    overcarbonating. I added a three-way co2 manifold into my setup, which is situated inside of
    the fridge. My ...

  • Posted in thread: Weird poor from kegerator on 09-25-2012 at 03:53 AM
    After upping to 12 psi and waiting an hour I get half beer half foam. Are there supposed to be
    bubbles showing in the beer line?Shouldn't be any bubble showing in your beer line. If it isn't
    a tempera...

  • Posted in thread: CO2 Regulator setting after installing 3-way manifold on 09-24-2012 at 09:51 PM
    Yes, 10psi in all kegs (unless you have a reg for each keg).Awesome, thanks for the answer!
    Just wanted to make sure I wasn't misunderstanding how the regulator works. For example, I
    wanted to make su...

  • Posted in thread: CO2 Regulator setting after installing 3-way manifold on 09-24-2012 at 02:59 PM
    I'm not out of gas- just got a new tank and my regulator showing the contents of the tank
    indicate I have plenty of gas. I don't think it's possible that it could have been bumped, as I
    have a nut on ...

0 COMMENTS
POST A COMMENT