missing link

Gift Premium Subscription To missing link

Join Date:


Last Activity:

11-25-2012 1:48 PM

Referrals: 1

4 Likes on 4 Posts 


  • Highland, MI
  • All Grain brewer - gadget maker
  • Beer
  • Sales to the shrinking car companies
  • Linc Spangler
  • I currently brew with a box that is about 1 cu ft. In the box are 2 pumps, 2 heat exchangers and all the electronics to control my brew system. No need for a brew cart.
  • Male
  • Married


  • Posted in thread: 12x12x6 BCS-460 Control panel is a tight fit on 09-23-2011 at 12:49 PM
    I used female spade connectors on the AC adapter for the BCS. That would free up alot of space
    in your box.What kind of wireless router are you using? That is the only thing I haven't
    completed. Plugg...

  • Posted in thread: Thermowell Question on 09-02-2011 at 12:00 PM
    There shouldn't really be a temp difference, the thermowell will make the probe react slower to
    temp changes but it isn't a big differenceLinc

  • Posted in thread: Non-Rims/Herms E-Build? on 08-26-2011 at 04:09 PM
    Since you can't put the heating element in the mash, you need to remove the wort from the mash
    to heat it and then put it back. Rims / herms or other will all have that same basic

  • Posted in thread: Heatstick power cord on 08-26-2011 at 01:51 AM
    I've used quite a few of the hf cords in my system. The bright yellow 12 ga cord has a fairly
    thick cover and has worked great so farLinc

  • Posted in thread: My electric system ver 6 on 08-25-2011 at 01:58 AM
    I use the bcs-460 to trigger the relays. Within the bcs system you can use external switches to
    make the unit behave differently. It makes for a really slick system.During the sparge, the
    float switch...

  • Posted in thread: My electric system ver 6 on 08-25-2011 at 12:59 AM
    I think I am getting closer to my ideal set-up. Brewed this past weekend and hit 84% with no
    issues at all. Hit the OG dead on. I was able to maintain my set point on my mash almost
    exactly the whole ...

  • Posted in thread: temperature control for a heatstick on 08-06-2011 at 12:42 AM
    If your planning to use the heatstick in the mash, you can't use temp control. You have to keep
    the heat stick in constant motion stirring the mash while watching the temp. If the heat stick
    stops mov...

  • Posted in thread: Overcarbed! How do I lower the carb level? on 08-01-2011 at 07:32 PM
    When this happens to me I just lower the regulator setting to 8 PSI or so and start drinking.
    The first 4 or 5 pints are foamy and it slowly goes away as I pour more pints.Linc

  • Posted in thread: Rust in HLT just noticed, already brewing on 07-16-2011 at 07:38 PM
    More than likely your element base is rusting. Not a big deal. You can seal with silicone if it
    bothers you. I've never noticed any off flavors from mine.Linc

  • Posted in thread: New build... Confusing ssr issues on 07-09-2011 at 02:34 AM
    my pumps will occasionally hum when the SSR is off. Must be from the same leakage issue. Is
    there anyway to stop this?Linc

Tap#1 = Beer Tap#2 = Beer THey change to often to keep up with the Sig.