mike191

LATEST ACTIVITY

• Posted in thread: Keezer/Freezer/Kegerator Inside Dimension Database on 02-10-2013 at 01:25 PM
  There are four dimensions missing from this list. Inside height at hump and floor. Overall
  height of unit at lip and top of lid.

• Posted in thread: Another Keezer Build on 02-01-2013 at 01:04 PM
  The plywood panels were attached to the oak borders by routing the inside edge of the oak
  borders the same thickness of the plywood. I then glued the panels in from behind. I used dowel
  joints to conn...

• Posted in thread: Another Keezer Build on 01-31-2013 at 03:33 PM
  I have seen your pictures of the front and side panels and wanted to know how the framing and
  1/4 or 1/8 inch inserts were joined? Looks like you inserted the thin panel into the 1 by 2.
  Any sketch of...

• Posted in thread: STC 1000 "Ebay" Temperature Controller Build on 10-16-2012 at 01:44 PM
  Be aware that some EBAY sellers have jacked the price 10X because "low supply". I asked the
  question and he answered.

• Posted in thread: Another KEEZER build.... w/ pics. on 10-08-2012 at 12:48 PM
  Nothing special... I've always taken the quickest route... 2 oz bottle of Old Fashion Homebrew
  Root Beer base, 8 cups sugar, 4 gallons water, and about 25 psi of Co2... done. Ultimately, I
  think somet...

• Posted in thread: Another KEEZER build.... w/ pics. on 10-05-2012 at 05:01 PM
  Great job! Share the recipe on Rootbeer?

• Posted in thread: Completed Kegerator - Almost on 09-30-2012 at 02:04 PM
  Thanks! It has been a lot of fun to build. The wood on the sides does not seem to be a problem
  at all. Stays at a consistent 38 - compressor doesn't seem to run to often or too long.If you
  do it, I wo...

• Posted in thread: Completed Kegerator - Almost on 09-30-2012 at 02:02 PM
  I had a kegerator go out on me where I used 1/4" ply around the sides - not even glued to the
  sides but actually applied to a frame that went around it giving about 2 inches of buffering
  between the p...

• Posted in thread: STC 1000 "Ebay" Temperature Controller Build on 09-30-2012 at 12:47 PM
  I see all that now, thanks! On this setup you were going to run a frig and fan. Run the frig on
  the cool cycle and the fan on the heat? Or run both on the cool? Or wire one outlet constant on
  and run ...

• Posted in thread: STC 1000 "Ebay" Temperature Controller Build on 09-28-2012 at 01:29 PM
  Here is a question from a total novice. Why do you go through all the wiring joining and use
  the ground as neutral? Can't you just run power to the unit, one set of in wire, and then one
  set of wires ...