VIEW MY

micahwitham

Gift Premium Subscription To micahwitham

Join Date:

06-03-2011

Last Activity:

03-09-2014 9:33 PM

3 Likes on 3 Posts 

    ABOUT ME

  • Single
  • richfield
  • mn

LATEST ACTIVITY

  • Posted in thread: Calibrating PID's - MYPIN's reading 10degrees different on 03-05-2014 at 11:45 AM
    I think the problem is my heat exchanger after much racking my brain. I took the RTDs out of
    the kettles and turned everything on and let it sit for a while and the 3 MYPINs ended up being
    within 1 de...

  • Posted in thread: Calibrating PID's - MYPIN's reading 10degrees different on 03-03-2014 at 10:18 PM
    One of my MYPIN TA4's is reading about 8-10 degrees off the actual temperature. Wondering if
    people have had trouble with these and if there is an "auto calibrate" kind of feature or if
    there's a way ...

  • Posted in thread: DIY 30AMP HERMS w/ 4 PID's, 2 Pumps, 3 Keggles on 02-07-2014 at 09:07 PM
    It's a weather proof fiberglass box I got from a place called axman surplus in the twin cities
    Super easy to drill in but wear a mask for sure!

  • Posted in thread: DIY 30AMP HERMS w/ 4 PID's, 2 Pumps, 3 Keggles on 02-07-2014 at 08:47 PM
    Kal I have a bottom draining MLT so I had to create some way to get access to the valve on it.
    I just shoved some paper towels in a the holes to block paint from going into the receptacles
    and I love ...

  • Posted in thread: 30Amp E-HERMS w/ 3 Keggles Build on 02-06-2014 at 11:12 PM
    Also, great thread thanks, why did you put the mash tun on the end/over the pumps?The Pumps at
    this point are not attached to the stand. They are on a little bracket that I built like the
    one Kal buil...

  • Posted in thread: 30Amp E-HERMS w/ 3 Keggles Build on 02-06-2014 at 10:40 PM
    Pj I'm not sure I understand what you mean. I just upload the photos in the "manage photos"
    window that comes up. What would be better? Any examples

  • Posted in thread: DIY 30AMP HERMS w/ 4 PID's, 2 Pumps, 3 Keggles on 02-06-2014 at 09:52 PM
    final of the panel and of course a little logo for the project done by my brother who's a
    graphic artist

  • Posted in thread: DIY 30AMP HERMS w/ 4 PID's, 2 Pumps, 3 Keggles on 02-06-2014 at 09:50 PM
    A few more with the brew stand finished

  • Posted in thread: DIY 30AMP HERMS w/ 4 PID's, 2 Pumps, 3 Keggles on 02-06-2014 at 09:45 PM
    And some more including the brew stand I made with some scrap cherry hardwood floors my friend
    had.

  • Posted in thread: DIY 30AMP HERMS w/ 4 PID's, 2 Pumps, 3 Keggles on 02-06-2014 at 09:40 PM
    And a few more including the old HERMS coil I had to refit after getting elements in my kegs.

0 COMMENTS
POST A COMMENT