Last Activity:08-12-2015 2:31 PM
Posted in thread: Use of on/off valves as modulating on 03-10-2015 at 11:36 AM
Thanks for the detailed response!The valve is exactly the one you show, actually. I wish I
could find a better control method (something like a V-port ball valve) as I believe you will
be correct in t...
Posted in thread: Use of on/off valves as modulating on 03-09-2015 at 04:11 PM
I'm hoping to get an analog signal to my arduino, then have the output based on a calculation.
Then have a current to open and current to close.
Posted in thread: Use of on/off valves as modulating on 03-09-2015 at 02:30 AM
Hey all,Been wondering if its possible to use a standard on/off ball valve and by turning the
power on and off to it quickly turn it into a regulating valve. Idea is that since the valve
takes ~5s to ...
Posted in thread: First atempt at Dragon's Milk Clone on 03-07-2013 at 12:47 PM
Well I racked last night and put all the chips in, before I had a chance to read these comments
(now I wish I had waited!) Hopefully the flavor isn't too much. The color was light vs what I
Posted in thread: First atempt at Dragon's Milk Clone on 03-06-2013 at 12:56 PM
We took the gravity reading with only about 15 min left in the boil and at that point I kinda
of "guestimated" how much more was going to evaporate off. In hindsight maybe I am lucky it
came out so cl...
Posted in thread: First atempt at Dragon's Milk Clone on 03-02-2013 at 10:41 PM
Hey all,So I've seen a few people talk about their attempts at DM. Last weekend my buddy and I
attempted to give it a go. Here is the recipe we used (based on Ohiodad's:12.00 lb Pale Malt (2
Row) US (...
Posted in thread: First big beer first 5g all grain on 02-19-2013 at 02:01 AM
I'd be curious to hear how this brew turned out. Was looking to do a dragonsmilk clone this
weekend (all grain) and follow in your foot steps. I was going to double batch sparge to try
and hit >1.080....
Posted in thread: Replacing grain with extract - conversion help on 02-15-2013 at 01:26 PM
i edited my original reply, should be more helpful :mug:Awesome response, much
appreciated:mug:! A lot more information than I expected, which is always a good thing!
Posted in thread: Replacing grain with extract - conversion help on 02-15-2013 at 01:19 PM
...redacted, recalculatinghaha, well my thought is that those conversion numbers must be
somewhat accurate otherwise you'd hear peoples OGs and FGs turned out different than they
expected. I suspect i...
Posted in thread: Replacing grain with extract - conversion help on 02-15-2013 at 12:56 PM
Hey all,So I've read that when you replace malted grain with extract, there is a pound to pound
conversion. The numbers I've read at .65 for DME and .75 for LME (can anyone vouch for these?)
but my qu...