Last Activity:04-09-2015 7:04 AM
1 Likes on 1 Posts
Posted in thread: Sampled first beer finally - Have questions on 09-08-2013 at 09:17 AM
I've had the large bubbles occur for me as well and while I haven't been able to specifically
attribute it to one thing or ther other, I have had a few ideas on what the culprit could be.
Posted in thread: Vodka in airlock went below fill line so I topped it off and on 09-08-2013 at 08:50 AM
Agreed, you shouldn't worry, chances are there was positive pressure inside the entire time.
Posted in thread: Home Super Brewery Build: Hybrid Electric/Gas 3BBL Build on 09-07-2013 at 08:03 AM
Very impressive and very cool, awesome brew room!Cheers
Posted in thread: Spend my money, pick apart my strategy on 06-18-2013 at 02:50 AM
I agree with the swamp cooler idea. If you check the water temp often enough, you should be
able to easily keep the beer in prime fermentation temps. It's a cheap and effective solution
to a very impo...
Posted in thread: Mash Tun Cooler Conversion Question on 02-04-2013 at 06:05 PM
Well I went ahead and ordered a bulkhead and 3 piece 1/2" ball valve from Ontario Beer Kegs,
and everything went together very easily. I just kept the gasket that came with the cooler and
used that in...
Posted in thread: Is Palmer's Cincinnati Pale Ale Good? on 02-02-2013 at 07:37 AM
This was my first brew as well. I turned out OK/drinkable despite my several errors, which
included pushing the bung into the fermenter and fishing it out with a coat hanger AND a blow
out. I aged a 6...
Posted in thread: Mash Tun Cooler Conversion Question on 01-30-2013 at 10:42 PM
At first I used a tape measure, then I confirmed it by placing a 1" drill bit in the hole.
Posted in thread: Mash Tun Cooler Conversion Question on 01-30-2013 at 10:04 PM
Just picked up a 5G round cooler from home depot to convert to a mash tun. I was just going to
pick up a standard conversion kit from bargainfittings, but it mentions that the hole can't be
Posted in thread: NanoBrewery build on 11-11-2011 at 02:31 PM
that almost sounds dirty...It is beer porn afterall
Posted in thread: Bottling Set up on 11-10-2011 at 08:45 PM
Heh heh, I know, I know..... green bottles, but I take precautions, they get fully covered by
towels and stored between solid objects on three sides. No light in the beer fridge either, so