Last Activity:02-06-2013 3:03 AM
Posted in thread: Kegging a Lager on 10-18-2012 at 03:43 AM
My understanding of the lagering process was that it just meant cold storage and conditioning.
Since that takes place after fermentation I didn't think that the lager/ale yeast difference
Posted in thread: Kegging a Lager on 10-17-2012 at 09:34 PM
Thanks for the responses! I fermented with an ale yeast so the DR was already done. I was
curious about the warm up because it had been sitting so long. I was thinking of doing a
secondary just to red...
Posted in thread: Kegging a Lager on 10-17-2012 at 08:23 PM
Hi guys,I am going to be legging my Oktoberfest this weekend and had a couple questions. It has
been lagering at 38 degrees for about 8 weeks now in the primary and it is ready to go. First,
should I ...
Posted in thread: CO2 Question on 09-02-2012 at 02:34 PM
Yea it's been open the whole time. I have heard of it rising, but falling worried me
Posted in thread: CO2 Question on 09-02-2012 at 01:32 PM
Ok so I kegged two beers yesterday afternoon. I am going to force carb at 30psi for 24 hours
and then drop to serving psi. I woke up this morning and checked it and the pressure had
dropped from 30 to...
Posted in thread: Kegging two at once on 08-28-2012 at 12:32 AM
OK all so I am kegging two brews on Saturday. I have been reading like crazy since it is my
first time kegging. I am leaning towards the 30 psi for 24 hours and then dropping to serving
pressure for a...
Posted in thread: Johnson Temp Controller A419 on 08-22-2012 at 02:14 AM
Well I ended up taping it to the side of the car boy and covering it in a few layers of bubble
wrap. Since then them temp has been pegged right at 66 and hasn't moved. Looks like I am going
with this ...
Posted in thread: Johnson Temp Controller A419 on 08-17-2012 at 10:36 AM
Also have another question, where do you set the temp controller on the actual freezer. I have
it set to the coldest setting but I think it drops the temperature too fast. I have the Johnson
Posted in thread: Johnson Temp Controller A419 on 08-17-2012 at 01:21 AM
Thanks for the suggestions! The gel packs seem to be the way to way I guess. Silver - how long
has yours been submerged? I feel like short term that is fine but I worry about long term the
Posted in thread: Johnson Temp Controller A419 on 08-16-2012 at 11:52 PM
I just got my temp controller for my Keezer today and I am not really sure how to use the probe
for best results. I searched the forums and there are some threads but a lot of them are older.
I first ...