VIEW MY

meshbackhats

Gift Premium Subscription To meshbackhats

Join Date:

04-16-2012

Last Activity:

11-01-2014 2:46 AM

Likes Given: 6

    ABOUT ME

  • Single
  • akron
  • ohio

LATEST ACTIVITY

  • Posted in thread: Electric Brewing Question on 09-15-2014 at 05:55 PM
    GotPushrods & BartpGreat info.Thanks for taking the time to explain that to me! Very helpful.

  • Posted in thread: Electric Brewing Question on 09-15-2014 at 01:50 PM
    Thanks for the reply-I would use a PID to control the element.It looks like in your design
    (every design that I have seen) the 5500 watt element is only capable of putting out of 1375w
    as it is only b...

  • Posted in thread: Electric Brewing Question on 09-15-2014 at 04:36 AM
    I was just curious if you could power a 5500 watt element using an SSR with an AC adapter for a
    laptop:Something like this would switch the SSR- something like this thinking is that the
    laptop swit...

  • Posted in thread: Cascades / Orange Pale Ale on 04-30-2014 at 12:36 AM
    This came out pretty darn tasty. This keg will go fast.

  • Posted in thread: My E-BIAB Setup on 04-24-2014 at 03:50 PM
    Awesome build! Did you build the controller yourself or did you buy it from somewhere?I got it
    from electrichomedistillery.comit works well.

  • Posted in thread: Cascades / Orange Pale Ale on 04-23-2014 at 05:18 AM
    I brewed this today. I was using a new PID and did not run an auto-tune……overshot
    my mash temp. Mashed a bit high….ok quite a bit high… so it will be interesting to
    see how thi...

  • Posted in thread: My E-BIAB Setup on 04-15-2014 at 09:01 PM
    Wow, that looks eerily similar to my setup (see pic). I'm about to punch a hole in my lid for
    wort recirculation. My fitting is a standard bulkhead with female 1/2" threads. I'll put a male
    camlock on...

  • Posted in thread: My E-BIAB Setup on 04-15-2014 at 03:36 PM
    I noticed what looks like a camlock fitting on your lid; how are you recirculating the wort
    during the mash? Do you have a hose or some sort of spray nozzle on the inside of the
    lid?Thanks -- love the...

  • Posted in thread: My E-BIAB Setup on 04-15-2014 at 04:50 AM
    Looks like a great setup! Are you using a 120V element, or do you have access to a 220V? Is
    120V sufficient to bring a 3g batch to a boil in a reasonable time?Yes, I am using 120V 15
    amps. I am using ...

  • Posted in thread: My E-BIAB Setup on 04-15-2014 at 02:39 AM
    This is my setup for 3 gallon BIAB batches. I use an electric heating element and a controller
    with a PID. I also use a small pump to reticulate during mash. I recently moved into an
    apartment and cou...

0 COMMENTS
POST A COMMENT