Merlyn77

LATEST ACTIVITY

• Posted in thread: 5500W Heating element on 12-14-2011 at 10:14 PM
  Mikeysab and JRems, I sent you both PMs.dave73ok, they are 14 1/4" long from tip to tip. The
  element is 12 7/8" long.As of right now all 4 are spoken for. I'll post again if someone
  changes their mind...

• Posted in thread: 5500W Heating element on 12-14-2011 at 04:31 AM
  Great advice. I purchased the McMaster-Carr 1" Locknut found here and it fits it perfect.Many
  of the other locknuts I found (at Tractor Supply for example) were deeper than the 0.38" that
  they offer.

• Posted in thread: 5500W Heating element on 12-14-2011 at 03:23 AM
  I got lucky at the store and they had a few of these heating elements on sale. Weeks before I
  had purchased one from amazon for around $26 shipped and now I find them for just under $10! I
  decided to ...

• Posted in thread: Project Locator on 12-08-2011 at 03:39 PM
  I did a small DIY that could be added.

• Posted in thread: Kegerator / Fermoire build on 11-27-2011 at 05:23 PM
  Here I have all the insulation installed, the plywood floor, and everything has been caulked
  and
  sealedhttps://lh3.googleusercontent.com/-KHPR5EPLi2Q/TtJ40sBiAxI/AAAAAAAAAIQ/BiZr6FgG4Zk/s720/I
  MG_7108....

• Posted in thread: Kegerator / Fermoire build on 11-27-2011 at 05:23 PM
  I've been reading these forums for about three years and have gained a tremendous amount of
  knowledge in a short time. I can't thank the homebrewtalk community enough for their advice,
  patience, and w...

• Posted in thread: Carboy/ Keg Cleaner Giveaway on 06-23-2011 at 04:27 PM
  Woohoo!

• Posted in thread: 240v heatstick idea on 03-13-2011 at 07:08 AM
  After pricing out going all stainless with the tri-clover clamps I decided it will be easier to
  just buy two heating elements and mount them in each keggle.Thanks for all your help!

• Posted in thread: 240v heatstick idea on 03-12-2011 at 05:25 PM
  Since I wanted to both heat my hlt and boil with it I figured a movable heat stick with built
  in temp probe would save me having to buy 2 heating elements, drilling two holes, and creating
  a larger co...

• Posted in thread: 240v heatstick idea on 03-12-2011 at 04:39 AM
  Thanks for all the chat. It has been very helpful.I'm renting for the next two years and would
  have to talk to my landlord about a gfci breaker. It currently is the 3 prong NEMA 10
  receptacle. The hot...