Last Activity:07-31-2015 4:32 PM
Likes Given: 42
25 Likes on 23 Posts
Posted in thread: Chugger Pump Help on 07-31-2015 at 04:27 PM
Yeah, the magnet spins freely, but that sounds like an issue I can't fix!
Posted in thread: Chugger Pump Help on 07-31-2015 at 03:46 PM
So I've been slowly building an electric indoor system and got it running last week. When I say
slowly, it has been a few years in the making. My problem is I bought a Chugger in May 2013
andso it is ...
Posted in thread: 30 AMP Cutler-Hammer GFCI Breaker on 06-18-2015 at 06:12 PM
Bump and price lowered to $50 shipped.
Posted in thread: 30 AMP Cutler-Hammer GFCI Breaker on 05-22-2015 at 07:45 PM
Thanks for the bump Rabe!
Posted in thread: 30 AMP Cutler-Hammer GFCI Breaker on 05-20-2015 at 07:28 PM
I bought a 30 Amp CH type GFCI breaker from another forum member a while ago, but the
electrician wouldn't let me use anything but their stock. Found it last week while cleaning out
the basement and s...
Posted in thread: Bells suing a small brewer on 03-23-2015 at 06:27 PM
I am not sure this is not the outcome that Bell's wants. If the trademark office rules that
Bell's common law slogan and Trademarked slogan do not conflict with the then trademarked
Posted in thread: Chunky Starter on 09-29-2014 at 05:28 PM
1968 is really flocculant and you'll get a really chuncky yeast starter almost everytime, or at
least that has been my experience
Posted in thread: Connecting copper HERMS coil to HLT on 09-04-2014 at 08:46 PM
Look at brewhardware.com Bobby has some combination compression/bulkhead fittings that are
really slick and a lot lower profile than a built up bunch of fittings. That is what I did on
mine and I love...
Posted in thread: Most Innovative Homebrewing Equipment on 02-28-2014 at 07:42 PM
I'd have to nominate Bobby_m's electric element housing for electric brewing. That is the first
purpose built piece of equipment I have been able to buy for my emerging electric brewery. It
saves a to...
Posted in thread: control panel parts on 02-26-2014 at 03:41 PM
That is what I got, I built very much the same thing but I will use it for both the HLT and BK,
switching elements by switching contactors and using the PID in manual for the BK. I used a