maxbing

LATEST ACTIVITY

• Posted in thread: Carboy/ Keg Cleaner Giveaway on 05-28-2011 at 05:59 AM
  pick me

• Posted in thread: Illuminated Switch question on 04-25-2010 at 10:32 AM
  I am getting ready to order some switches for my Auber PID project and have a question.I am
  looking at this style Switch is a LED illuminated 24 volt switch. Can I use this to switch the
  12 control c...

• Posted in thread: Arrogant Blegian??? on 01-25-2010 at 03:38 PM
  I ended up not using the Belgian yeast cake. I am all for trying something. The biggest reason
  that i did not do it is that the tipple still has some more fermentation to do. The other
  reason is that ...

• Posted in thread: Arrogant Blegian??? on 01-24-2010 at 01:45 PM
  I am brewing an Arrogant Bastard clone today and I happen to have the yeast cake from a Belgian
  tipple in the fermenter. I am really tempted to try that yeast....Please talk me out of it...or
  into it....

• Posted in thread: Need false bottom/manifold idea on 01-20-2010 at 04:17 PM
  Ping JayBird from this site. I bet he can make you one.

• Posted in thread: Jay Bird's False Bottom on 01-17-2010 at 08:02 PM
  eff is slightly better but the sparge was nice an quick. It was hard to tell if the efficiency
  was better because this was a high gravity beer 1.090 I got 79% which is not bad for that high
  of a gravi...

• Posted in thread: Jay Bird's False Bottom on 01-17-2010 at 05:32 PM
  I just used a Jay bird False bottom for the first time in a 15 gallon keg. I had been using a
  10 gallon rubbermaid with a SS braid.. For those of you that think a a SS Braid works good, you
  only think...

• Posted in thread: Blichmann Boilermaker $20 Feedback Survey Rebate - Austin Homebrew Supply on 01-07-2010 at 01:47 PM
  Boy, you make it really hard to justify piecing one together. I was about to pull the trigger
  on a 25 gal mega pot but the best I could do after adding a ball valve (not as nice), sight
  glass (plasitc...

• Posted in thread: Electric HLT Element placement on 01-05-2010 at 12:13 PM
  My Current set up is a "Pol Classic" using a 10 gal Rubbermaid with the element through the
  bottom and an automatic stirrer. It works well. I plan on reusing both the stir motor and the
  HEMS coil. But...

• Posted in thread: Electric HLT Element placement on 01-04-2010 at 05:53 PM
  I am making a new electric HLT for my HERMS. I am making it out of a 15 gallon keg. My question
  is on the placement of a 5500 watt element. I am thinking that I will put the element through
  the bottom...