Last Activity:07-28-2015 3:58 AM
1 Likes on 1 Posts
Posted in thread: Single Tier, 3 Pump, BCS-462, Automated Rig on 08-03-2015 at 03:17 AM
Brewers Hardware is finishing up on a stainless frame and kettles for me right now and then
I'll get to start plumbing and wiring. I'm staying with my original 3 pump design, but will be
adding a few ...
Posted in thread: Anyone have access to a waterjet or machine shop, need a hole cut/drilled in a TC cap on 07-24-2014 at 06:57 PM
Yup, the drilling part is where it gets difficult. Putting a 3/4" hole through a 1/8" thick
stainless TC cap is not as easy as it sounds, at least without the 3/4" cobalt bit and a drill
Posted in thread: Anyone have access to a waterjet or machine shop, need a hole cut/drilled in a TC cap on 07-23-2014 at 05:27 PM
Totally agree of the shelf would be cheaper, I've looked everywhere, and unfortunately I need a
1.5" TC fitting with 1/2" NPT female on both sides that doesn't seem to exist. I guess I'm
going to end ...
Posted in thread: Anyone have access to a waterjet or machine shop, need a hole cut/drilled in a TC cap on 06-29-2014 at 06:44 AM
Building a CIP spray ball setup for my Chronical and would like to attach to the 1.5" TC on the
lid. Need a hole cut in a 1.5" TC end cap so the 1/2" NPT male QD fitting can pass through and
Posted in thread: [Initial Release] RaspberryPints - Digital Taplist Solution on 03-30-2014 at 10:59 PM
Just wanted to say thanks for this project! While I'm not using it in the traditional
RaspberryPi setup, I was able to get it installed and working on my GoDaddy shared hosting
account and use it from...
Posted in thread: Harbor Freight Tools -- What works? and What doesn't? on 09-10-2013 at 03:51 AM
I have these adjustable wrenches and they're great, no issues with them:
Posted in thread: VA group bulk grain buy #6 on 03-14-2013 at 06:09 AM
LOL a bag of Briess 2-row for nearly $75+ship? haha NO. I'm pretty sure I pay under $50/bag at
Posted in thread: Hacking the BCS to add customized web pages - done! on 03-03-2013 at 06:25 PM
Hey I offered to help with that! ;)I'm of course interested.
Posted in thread: Any brewers in the Bristow/Manassas Va area? on 02-03-2013 at 09:41 AM
I'm in Gainesville. You all still meeting every month? Any website / club details?
Posted in thread: Upright Keezer, 8 taps, 11 kegs on 01-28-2013 at 03:52 AM
Jon, Which neon markers are you using on that black dry erase? I've been through two different
sets of markers on mine and they don't show up worth a crap on the black board.