Last Activity:06-11-2014 6:00 PM
Age:33 years old
Posted in thread: Lagunitas IPA Extract Recipe on 05-13-2014 at 04:55 PM
Step by StepMash at 154 °F (68 °C). Boil for 90 minutes, adding hops as indicated in the
ingredient list. After the boil, let the wort sit for 15 minutes before cooling. Ferment at 70
°F (21 °C).Extra...
Posted in thread: Adventures in stainless - e-HERMS and fermenter on 04-04-2013 at 09:02 PM
OK so I've been planning an e-HERMS system for a while now. It started out with just a single
keg converted to a BK for extract 5-10 gallon batches but then I wanted to take it further! So
I figured I...
Posted in thread: Camco 02963 5500W ULD element dimensions? on 03-21-2013 at 07:53 PM
Beautiful!!! Looks like that will just fit in my sankey keg. Glad today was payday...think I'll
order up a couple!How do you like using that element? Any cons? Thanks, Matt.
Posted in thread: Camco 02963 5500W ULD element dimensions? on 03-21-2013 at 07:01 PM
Hi folks, so I'm finally getting all the pieces together to create an E-HERMS setup. In looking
around at the different element types it seems many favor the Camco 02963 5500W elements.Any of
Posted in thread: Welding Compression fitting and thermowell on 03-19-2013 at 02:28 PM
Thanks Bobby_M I think he has the equipment to turn the threads but I'll have to ask him over a
couple of beers. I would rather do it that way than the shortcut method.
Posted in thread: Welding Compression fitting and thermowell on 03-19-2013 at 02:13 PM
Thanks for the reply. I'm not worried about his welding capability. As far as I understand
sanitary welds are pretty common sense and straight forward. Purging the interior with argon,
cleaning and pi...
Posted in thread: Welding Compression fitting and thermowell on 03-19-2013 at 01:33 PM
Hi folks I'm building a sankey fermenter similar to the Brewers Hardware kit except on a larger
scale. I'm going to use a 6" triclover fitting so that I can easily clean and inspect the
inside of the ...
Posted in thread: New way to control Pellet Hop gunk! on 03-08-2013 at 02:54 PM
Whats the hole diameter? I'm in the process of creating an all grain system out of 15g sankys
and the mash tun is next on my list. Curious to know how yours works out...might be time to
place another ...
Posted in thread: New way to control Pellet Hop gunk! on 01-22-2013 at 12:28 AM
How big is your keggle top opening? Did you have to give him the distance from the outside to
the inside of your opening so the hanger support would be the right length?The keggle opening
Posted in thread: New way to control Pellet Hop gunk! on 01-16-2013 at 11:52 PM
FedEx just dropped off my new 7.5" x 14" 300 mesh filter! This thing looks great and the metal
work is excellent - good welds, no burrs, ground down where it needs to be, etc. Chad, you
definitely do ...