Gift Premium Subscription To mattrobertson

Join Date:


Last Activity:

07-11-2013 11:46 PM

1 Likes on 1 Posts 


  • Surgeon
  • Classic Rock
  • I don't read books, I just look at pictures instead
  • Just finishing an eHERMS keggle system. Keggles are at the welder's. The new SS-in-PEX CFC is almost done. Brewstand is done.
  • DFH60
    Left Hand Milk Stout
  • DFH60
  • Left Hand Milk Stout
  • Male
  • Married
  • Fort Collins
  • CO


  • Posted in thread: DIY Interwoven "Rib-Cage" Immersion Chiller on 02-27-2011 at 01:22 AM
    Looks like MW66 might be on to something here. I would like some opinions as to which direction
    chill water should flow. In other words, should the chill water flow from top-down or bottom
    up? If I re...

  • Posted in thread: Another Ebay deal - 1/2 inch Silicone tubing on 02-12-2011 at 12:12 AM
    I was hoping to avoid kinkiness by using bobbym's youtube technique of stretching the tubing
    over the threads on a street elbow. this avoids the kinking problem and also keeps things at a
    true 1/2" ID...

  • Posted in thread: Another Ebay deal - 1/2 inch Silicone tubing on 02-11-2011 at 11:55 PM
    i emailed the guy on ebay to see how he would combine shipping if ordered by the foot. when
    bought by the foot, it says that he charges over $2 for shipping. so if i ordered 50ft, is it
    gonna be 50 x ...

  • Posted in thread: Another Ebay deal - 1/2 inch Silicone tubing on 02-11-2011 at 09:02 PM
    there's a 200ft roll on ebay for $200 + $36 shipping. i only need 50ft. is anyone interested
    splitting this up if i order it? i would like to find 3 other people to sell the other 150ft to
    at cost (i ...

  • Posted in thread: Does anyone want to build/sell a pre-built control panel? on 01-16-2011 at 03:14 PM
    I would like to step up to a HERMS system similar to bobbytuck's with blichmann kettles. i will
    do the fabrication and kettle work, but i do not have the knowledge or desire to safely do the

  • Posted in thread: Bell's Two Hearted Ale Clone (close as they come) on 11-17-2010 at 02:41 PM
    After reading 35 pages of posts, I still have a few ?'s. I tried to ask the OP but his mailbox
    is full and not accepting new messages. Any help would be appreciated!Alot of folks have
    adjusted things ...

  • Posted in thread: Keg to Keg transfer? on 08-02-2010 at 01:34 AM
    Can someone tell me what I did wrong with my 1st corny-to-corny transfer? I opened the relief
    valve in the destination keg and used very low constant psi in the source keg. i still got a
    ton of foam a...

  • Posted in thread: Hoppy American Amber or Malty American Pale Ale? on 06-15-2010 at 08:50 PM
    i'd like to try this. what dry yeast would you recommend and how much?thanksmatt

  • Posted in thread: how to carbonate a keg? on 06-13-2010 at 04:12 PM
    i like the sit and forget method for a week plus but is it okay to hook up the beer line
    disconnect while carbonating or should i just hook up the gray gas coupler and leave the black
    one off? thank y...

  • Posted in thread: What size brew pot should I buy? on 04-29-2010 at 11:31 PM
    I am new to brewing and want to know what size brewpot to get. I will be kegging the beer each
    time. I have an electric stovetop.Thanks!Matt