Gift Premium Subscription To mattmauriello

Join Date:


Last Activity:

02-22-2014 2:19 AM

1 Likes on 1 Posts 


  • Silver Spring MD
  • I've entered the world of all grain! Simple setup so far with a turkey fryer burner, but it works. had some hits, and some misses, but the best was a DFH 60 minute IPA clone that yooper posted.
    Now, i just need to get my temps under control, because fermenting in MD in the summer (78-80 degrees on the fermenter) is really not working out.
  • good ones, i hope.
  • haus pale
  • Male
  • Single


  • Posted in thread: eBIAB PID Control on 08-15-2013 at 01:55 AM
    That diagram looks great to me, with one small exception...The placement of the ammeter will
    only measure the current going into the pid, which will be nearly nothing. If you we're hoping
    to measure t...

  • Posted in thread: Could I get a second eye on my BIAB controller? on 08-14-2013 at 07:22 PM
    i noticed the indicator for the 'system power' is in series with the contactor coil (the power
    goes through the light, then the contactor). Pretty sure they should be in parallel, so the
    power goes th...

  • Posted in thread: Ebay RIMS is tested and works!!!! (Super Budget Build) on 03-26-2012 at 06:01 PM
    Those stats are are horrible, and written in Engrish. The reality that I believe is as follows:
    The circuit was designed to run on 220v @ 10a. This means that the circuits should be able to
    handle 110...

  • Posted in thread: Almost Complete (W/Pictures) on 01-25-2012 at 06:15 PM
    P.S., Thumbs up for the person who notices my :drunk: mistake!if no one else found it, i think
    you mismatched the element plug to the socket on the control box. i see an L14 receptacle (4
    contacts) an...

  • Posted in thread: Attaching wheels to my new Keezer on 06-24-2011 at 06:00 PM
    Do they line these things with aluminum foil? They sure don't take any abuse very well. I'm
    worried about what could happen if I ever drop a keg.Thats why I'm seriously considering
    putting a sheet of ...

  • Posted in thread: Attaching wheels to my new Keezer on 06-24-2011 at 05:56 PM
    Wish I could weld or I'd give that a try. Unfortunately my skills are limited to wood, glue,
    and screws. My Grandfather always told me I should have gone to school for welding rather than
    'messing' w...

  • Posted in thread: Attaching wheels to my new Keezer on 06-23-2011 at 08:17 PM
    rather than doing a full platform, i was planning to make a square from some angle iron that
    would allow the freezer to sit just inside the upward lip. then weld the plates to that square
    frame, and a...

  • Posted in thread: Carboy/ Keg Cleaner Giveaway on 06-01-2011 at 03:36 PM
    Looks like a nice cleaner. Sign me up!!!!!

  • Posted in thread: Why wont this adapter power my fan? on 05-18-2011 at 08:09 PM
    another thing to look out for... i have seen a lot of wall transformers with non-serviceable
    fuses inside them (non-serviceable because the plastic case is sealed). I'm not saying that
    adapter had a f...

  • Posted in thread: Feedback on Proposed Design on 04-27-2011 at 07:25 PM
    looks made for BIAB.yes... yes it does.

I'm not drunk, I'm just exhausted from stayin' up all night drinkin'! -- Peter Griffen