Last Activity:05-29-2015 5:44 AM
Posted in thread: Yooper's Oatmeal Stout on 11-13-2012 at 02:13 PM
Thanks, Yooper! I'll give it a shot as-is this time and get it right next time.
Posted in thread: Yooper's Oatmeal Stout on 11-09-2012 at 04:22 AM
What would happen if you subbed in chocolate for the pale chocolate? I screwed up my order at
the LHBS, and all of the non-base grains are mixed up together, so at this point I'm kinda
screwed if it'l...
Posted in thread: Will this motor turn a mill? on 05-22-2011 at 06:10 PM
Thanks for the advice. I think I'll find another use for this motor.
Posted in thread: Will this motor turn a mill? on 05-21-2011 at 05:20 AM
Hey there HBT,I have a Crankandstein 2A that I'd like to motorize. I have a motor from a
dishwasher pump, and I'm wondering if it's got enough 'oomph' to turn it. Here's the specs
(taken off of the mo...
Posted in thread: Type of tubing/hose for transfering boiling water/wort?? on 03-06-2011 at 07:37 AM
BrewMasters Warehouse has silicone tubing for 2.10 a foot. It's a great deal, and will handle
boiling without a problem.
Posted in thread: Yet Another "Is my beer ruined?" thread on 02-03-2011 at 11:14 PM
I didn't take an initial OG, so I only have my mid-fermentation hydrometer and refractometer
readings. Beersmith has a tool where you can enter a hydrometer and refractometer reading
(taken at the sam...
Posted in thread: Yet Another "Is my beer ruined?" thread on 02-03-2011 at 07:26 PM
Thanks in advance for putting up with yet another newb question.I brewed a Belgian Dark Strong
about two weeks ago. Here's the recipe: used two vials of WLP570 in a 1.5L starter. I've never
Posted in thread: Food Grade Silicone O rings (Where to buy Retail) on 01-16-2011 at 05:32 AM
Brew Depot on Mansell usually has some in the more common sizes. Give them a call and see if
they have what you need.
Posted in thread: March "Seal less" Pump on 12-15-2010 at 04:55 PM
Instead of wiring directly to a plug, wire to a switch, then to a plug. Mount the switch and
pump to some kind of secure base (you *are* keeping your pump safe from drips, right?), and
don't forget yo...
Posted in thread: CPVC vs bazooka screen on 12-13-2010 at 07:08 PM
I've used both. I started with a Zymie braid, and then moved to a CPVC manifold. The manifold
was faster flowing without sticking and cleared faster during vorlauf. The braid/mesh was
easier to deal w...