Gift Premium Subscription To marzsit

Join Date:


Last Activity:

05-28-2014 4:07 AM

6 Likes on 6 Posts 


  • kent, wa.
  • Female
  • Single


  • Posted in thread: Watlow DIN-A-MITE SSRs -use with Auber PID or BCS? on 10-13-2012 at 10:03 PM
    SSR: Watlow DIN-A-MITE C:Specific model: DC1C-5024-C000 Solid State Power Control 240 VAC, 50
    Amp The part # lists what I'm assuming are the most important specs: DC (DIN-A-MITE "C"
    series)1: Single-P...

  • Posted in thread: PID overkill? on 10-11-2012 at 03:21 AM
    i use a pid on one of my keezers, but only because i already had it (got it for free during an
    upgrade at my work) and i had everything lying around in the garage to put it together. i
    programmed it t...

  • Posted in thread: NEW KEG SALE! HBT *ONLY* Promo Code! - on 06-28-2012 at 08:59 AM
    Code please :)i could use a few 2.5 gallon kegs.

  • Posted in thread: sous vide on 04-09-2012 at 11:55 AM
    i've done the crockpot+pid controller for sous vide, it does work but it takes awhile for the
    temperature to stabilize at the setpoint. i have a large oval rival crockpot, i think it's an 8
    quart mode...

  • Posted in thread: Question about soda dispensing on 11-15-2011 at 02:06 AM
    in theory putting the entire carbonator in the fridge would work as long as you draw out small
    quantities of soda, but the motor must be kept dry... condensation could cause problems..

  • Posted in thread: Bought 3 kegs, one has a port on the bottom, can i use the port? on 11-15-2011 at 01:50 AM
    that's a golden gate keg, the tapping equiment requires 2 units- the lower port is the beer out
    , the port on the top is the gas in. pressure and gravity taps are available, i own a set of
    each :)the ...

  • Posted in thread: cloudy/flat seltzer (using motorized carbonator) on 09-27-2011 at 10:59 AM
    do you have a good check valve in the water line to your carbonator? you should have a check
    valve before the inlet to the pump, and it can't contain any brass or copper. some health
    departments requi...

  • Posted in thread: Soda dispenser - backflow problems on 09-12-2011 at 11:35 PM
    you can use as many additional inline check valves as you want to, provided they contain no
    brass or copper which creates toxic compounds in the presence of carbonic acid. if the pump on
    your carbonat...

  • Posted in thread: Fridge-less Kegerator? on 09-11-2011 at 01:18 AM
    sounds like you are looking for a premix soda dispenser. something like this premix dispenser
    works just like a jockey box but has it's own refrigeration system built-in so no ice is
    needed. the soda...

  • Posted in thread: Grinders on 08-17-2011 at 10:25 PM
    northern tool sells a cast iron grinder that comes with a v-belt pulley, it's very heavy-duty
    and is about $80 new. pair it up with a small motor and it will grind anything and last
    forever. no plasti...