Last Activity:12-18-2014 8:28 PM
1 Likes on 1 Posts
Posted in thread: Any group buys in Michigan? on 12-17-2014 at 08:33 PM
In metro Detroit area and am interested in base malt as well as some quantities of specialty
Posted in thread: Free HBT Membership on 12-17-2014 at 04:30 PM
Posted in thread: 20 Gallon MegaPot - $275 on 12-12-2014 at 10:13 PM
How about a weekend bump...I'm open to offers...and will even replace that ball valve with a
stainless 3 piece if buyer wants.
Posted in thread: Serving Keg Beer Issue on 12-12-2014 at 01:26 PM
Thanks guys for the ideas and help.Under pressure, I can press the poppet down and....no
shower. Nothing...I left the keg pressurized in the kegerator not hooked up (2 or 3 days ago).
It had no pressu...
Posted in thread: Serving Keg Beer Issue on 12-11-2014 at 04:14 PM
With a very low pressure on the keg (2-5 psi), push the liquid poppet down (small screwdriver
or nail set). Beer should come out. If not, increase the pressure a bit (5-10) and try
again.Will try this...
Posted in thread: Serving Keg Beer Issue on 12-11-2014 at 03:47 PM
System: Danby Kegerator converted to two corny kegs. Primary CO2 regulator on the back to a
secondary regulator (with 3 secondaries to be able to serve two and carb one) inside the
Posted in thread: Cornelius Secondary Regulator Pressure Range on 12-11-2014 at 02:46 PM
Posted in thread: 20 gallon brew kettle on 12-08-2014 at 04:05 PM
I'd be willing to ship...but I don't expect that to be cheap. PM me if you are still
Posted in thread: Cornelius Secondary Regulator Pressure Range on 12-05-2014 at 03:25 PM
Yes.I did 'bench testing' of the system before installing into kegerator.Had CO2 hooked up to
primary and then secondary regulator and no lines from the secondry regulator so I discovered
this by open...
Posted in thread: Cornelius Secondary Regulator Pressure Range on 12-04-2014 at 05:03 PM
So some months ago I bought a secondary regulator assembly with 3 secondaries so I can serve
two and carb one in my kegerator. Looks similar to the one pictured but instead of Taprite's, I
am using Co...