Last Activity:11-18-2013 10:43 AM
Likes Given: 43
1 Likes on 1 Posts
Posted in thread: Bulk Buying - Free Shipping on 10-22-2013 at 04:45 AM
I've ordered from William's several times. They've always done a great job getting my orders
shipped out the same day.
Posted in thread: Mash tun? on 10-08-2013 at 03:35 AM
You can probably get everything from BargainFittings if you're going with a braid instead of a
Posted in thread: cork depth, self correcting??? on 09-02-2013 at 07:16 AM
My first corked/caged batch was pretty spot on but once they carbed up they popped to the exact
spot and held fine.
Posted in thread: Too much Whirlfloc on 09-02-2013 at 07:12 AM
Why use whirlfloc in a dark beer?This. I skipped it in my recent porter. Purely aesthetic
right?As to the amount, WOW! But I'm glad it's coming along well. Keep us posted! :)
Posted in thread: erlenmeyer flask boilover on 08-22-2013 at 06:41 AM
I recently started using a couple drops of fermcap in order to boil in my 5L Erlenmeyer and I
still need to watch it like a hawk.What I used to do is boil the starter wort in a separate pot
Posted in thread: Is there a simple quick way to swap lines between a Sanke and pin lock keg?? on 06-02-2013 at 08:12 PM
Kinda similar but for pin lock:
Posted in thread: Large size Grolsch bottles and carbonation on 05-31-2013 at 03:38 AM
I've batch primed and used large 1.5 L Grolsch and similar swing tops before with no problems.
Proper head space was created by the racking cane same as with 12 oz bottles.They work fine for
Posted in thread: Cleaning and drying siphon tubing on 05-31-2013 at 03:14 AM
I scrub any gunk out with a long brush like rodwha linked. Rinse with hot water, then rinse
again with starsan from my spray bottle and hang to dry. I always make my starsan using
distilled water so t...
Posted in thread: Wyeast 1187 ringwood ale problem on 05-29-2013 at 09:22 PM
Plugging in a manufacture date of 1/31/2013 the Mrmalty pitch rate calculator shows an
estimated viability of only 14%
Posted in thread: gas troubles on 05-25-2013 at 06:47 PM
Remove the plug, apply some keg lube and reassemble. See if that does the trick. Also I would
use Starsan in a spay bottle to check for leaks as opposed to soap.