Last Activity:11-25-2015 10:56 PM
Likes Given: 22
Posted in thread: My Keezer is done! on 11-19-2015 at 01:17 AM
is there a rule for faucet spacing?
Posted in thread: Moving to the Kennesaw Area, any recommendations? on 11-18-2015 at 11:42 PM
Traffic around town is always something to consider... the closer to you workplace the better
in my opinion..
Posted in thread: 10 Gallon Cooler Opinions on 11-04-2015 at 03:59 PM
Thanks to the info and tips provided...Here is the final product. have not tested it yet...
Posted in thread: 10 Gallon Cooler Opinions on 10-28-2015 at 01:02 PM
round coolers have a more desireable height / width ratio resulting in deeper grain bed for fly
sparging. Shape of cooler, grain bed depth makes no difference for batch sparging. That cooler
Posted in thread: 10 Gallon Cooler Opinions on 10-28-2015 at 12:44 PM
Moving to AG brewing...is there a real gain of using 10G round cooler vs. a rectangular one?I
pickup an Igloo 52 qt at walmart... $27.36 a few days reading and comparing.. The tendency /
Posted in thread: Guide to set internal chest freezer thermostat to >32F; Eliminate external control on 10-18-2015 at 03:59 PM
Did it shut off before you tampered with the thermostat?Perhaps it's time to consider an
STC-1000...Thank for the tip and input. :mug: Already got added, works perfect, using exiting
Posted in thread: 60qt. Ice Cube Mash Tun Build - $cheap and simple on 10-14-2015 at 11:30 PM
I've been planning the transition to all-grain for quite some time and I finally was able to
put together everything. My goal was to keep this mash tun as simple and cheap as possible
while being big ...
Posted in thread: Guide to set internal chest freezer thermostat to >32F; Eliminate external control on 10-03-2015 at 02:36 AM
If you turn it the opposite direction, does the compressor shut off? (Take caution in not
backing out the set screw entirely, they can be really difficult to put back together) -31C?
Posted in thread: Guide to set internal chest freezer thermostat to >32F; Eliminate external control on 10-01-2015 at 11:11 AM
I also have a Magic Chef Model # HMCF7W2. I am unsure which is the coarse set screw. See
pictures... I have adjusted (all the way clockwise) the screw from the 3rd pic (white cable)
without much chang...
Posted in thread: Hardwire Stc-1000 into freezer on 09-30-2015 at 01:56 AM
I didn't use a diagram. I took the hot and neutral off the stock thermostat and wired them up
to the stc 1000 power and the cooling relay. did you remove/replace the stock freezer temp
sensor? how did...