Last Activity:11-28-2015 6:18 AM
Likes Given: 10
20 Likes on 17 Posts
Posted in thread: 1.5bbl Beer Brewing HERMS/RIMS system FS on 09-14-2015 at 01:55 AM
1.5bbl HERMS/RIMS system for Sale all inclusive. Everything necessary to produce Beer from
Brewing to Kegging is included. After 3 years and many batches on this system, I've lost my
brewing space so ...
Posted in thread: Single Tier, 3 Pump, BCS-462, Automated Rig on 04-08-2015 at 09:29 PM
Way to go. Looks like my rig will be the pilot for our new brewery.
Posted in thread: Efficiency Boost? on 02-06-2015 at 10:20 PM
I normally get between 90-95% efficiency on mine.
Posted in thread: brewershardware jacketed coni+glycol ?'s on 02-04-2015 at 04:18 AM
My glycol chiller operates the pump continuously and has a temp control that cycles the
compressor if the reservoir gets over temp. Different models varry, so I would check on the one
you're going to ...
Posted in thread: Question about HERMS/pump/lines on 01-15-2015 at 09:11 PM
I fly sparge on 1.5bbl HERMS system. Although a "fly sparge" for me takes 15 minutes instead of
an hour.All I do after mash out is swap hoses so my MT out goes to the BK and my HLT out goes
to my HERM...
Posted in thread: Boayou Classic HERMS Mash Tun Conversion with Jaybird False Bottom on 01-13-2015 at 09:57 PM
My stand was an "O" but the X version should work just fine.The dip tube in mine is near the
center so it's ringed by the stand, which adds a side filter. If you have an X you should pick
a quad and p...
Posted in thread: Mash tun dip tube question on 01-13-2015 at 09:51 PM
In practice, not really. The only real consideration is making it so you can get the false
bottom in and out easily.
Posted in thread: Mash tun dip tube question on 01-12-2015 at 12:48 AM
I've got a post on how to convert one of these up already. Please feel free to look it up.
Posted in thread: Question about HERMS/pump/lines on 01-05-2015 at 09:07 PM
You want your HERMS coil to be the same diameter as the rest of your plumbing.
Posted in thread: Help figuring out HERMS on 09-09-2014 at 10:03 AM
Look up a HERMS process diagram and things should become more self explanitory. There should be
two ports on the mash tun if he was running it right.