Last Activity:04-16-2014 8:27 AM
Posted in thread: Panel Mount RTD connectors on 03-22-2010 at 09:01 PM
Auber's support is phenomenal. Every question I've e-mailed - even on weekends - has been
answered w/in an hour. I'll give 'em a little slack in the price dept. for that.Agreed. I got
confused one day...
Posted in thread: What to use for control box on E-brewery build on 12-29-2009 at 11:35 PM
I've become an avid user of fermcap as well. Not so much for fermentation, but for the boils.
Especially for preparing starters. I boil the starter wort right in my Erlenmeyer, with the
shape of an Er...
Posted in thread: What to use for control box on E-brewery build on 12-28-2009 at 11:12 PM
Just NEMA 4 is necessary...4X is actually NEMA 4 but corrosion resistant. Honestly, neither are
"necessary" in my mind but there are some precautions that should be taken when there is water
Posted in thread: What to use for control box on E-brewery build on 12-26-2009 at 10:20 PM
Just scored a 16"x14"x6" from eBay for $70 including shipping. I think that should work - it's
Nema 4X, rated for outdoor. I am planning to tap a 120V leg off the 240V for pump and aux
Posted in thread: What to use for control box on E-brewery build on 12-23-2009 at 11:37 AM
It should also be noted that you need to use separate 110/120v and 220/240v. The PID
controllers don't like high voltage. Again, rough diagram made with low tech program. Know your
stuff and have some...
Posted in thread: What to use for control box on E-brewery build on 12-22-2009 at 10:08 PM
I used a 12x12x6 box from home depot. It takes some planning, but it wasn't too hard to get
everything in there. The Pol did his in 8x8x6-Screw that-with my mediocre wiring skills it
would look like c...
Posted in thread: What to use for control box on E-brewery build on 12-22-2009 at 07:49 PM
What is everyone using for their control box/enclosure on their electric builds? I've found a
few online that are designed for this purpose (sealed, sub panels, ventilation, etc.) but they
are all buk...
Posted in thread: Mike's Electric Indoor Brewhouse on 05-30-2009 at 01:58 PM
Yes, that helps. Thanks.
Posted in thread: Mike's Electric Indoor Brewhouse on 05-29-2009 at 01:31 PM
Agreed, nice write-up. I also like the idea of the bottom drainI have a question - not sure if
it is appropriate for this thread but didn't think it was worth starting a new one.I'm planning
to go ele...
Posted in thread: I've Had it With These POS Traceable Thermometers! on 03-06-2009 at 04:55 PM
True, but it would be nice to unplug the MT probe and plug in the HLT probe so I can monitor
both w/o actually removing the probe.I think I'm leaning toward installing a bulkhead fitting
on the MT and...