Last Activity:02-27-2015 1:52 PM
1 Likes on 1 Posts
Posted in thread: Help me im canadian!!!! on 04-06-2013 at 08:13 AM
Hi all, I have spent two years watching all you guys drink amazing beers and fresh iPa's which
is basically unheard of in Canada. I would really like to try a fresh ipa to see what these
Posted in thread: Purging with C02 to prevent oxidation on 12-12-2012 at 07:41 PM
Hi all,Here is a quick breakdown of my process. All Grain brewer. Primary fermentation of about
3-4 weeks then transfer to a secondary and cold crash for about a week. This allows for super
Posted in thread: Yeast Starter for Lager on 03-24-2012 at 03:15 PM
Posted in thread: Yeast Starter for Lager on 03-24-2012 at 06:46 AM
Hi All, Question for you, i have a Wyeast lager yeast which is one month old. I would like to
pitch the correct amount of yeast and am wondering can i do a 2L yeast starter twice? as in
prepare the fi...
Posted in thread: Deep freeze fermentation mold issue on 03-07-2012 at 07:39 PM
How do u run your temperature probe if not thought the top seal?
Posted in thread: Deep freeze fermentation mold issue on 03-07-2012 at 07:18 PM
Hi all,I have been using a newer deep freeze with temp controller for fermentation but it seems
no matter how much I clean it I get mold forming on the joints of the freezer, in the bottom,
Posted in thread: Looking to upgrade my basic all Grain Setup WHAT SHOULD I GET?? on 01-07-2012 at 04:28 AM
Hi all, Thanks for all your input on the upgrade I wanted to show you guys how it all came
together. What I ended up doing:1. Blichmann 10 gallon boilermaker 2. March pump - thanks to
kal from the ele...
Posted in thread: Moving my Boil Kettle, is it safe? on 12-28-2011 at 08:10 PM
Hi all,I just received my Blichmann 10g boilermaker in the mail and an super excited about it
however, in the directions it says that the handles are for transportation of the kettle when
empty only. ...
Posted in thread: Bottling wand for Perlick 525/75, AKA Bowie Bottler on 12-24-2011 at 05:56 PM
I had the same problem. I noticed some of my faucets had a manufacturing burr on the end. I hit
it quickly with a countersink bit in the drill, problem solved. 1/16" chamfer removed the burr
and also ...
Posted in thread: Bottling wand for Perlick 525/75, AKA Bowie Bottler on 12-24-2011 at 12:34 AM
Anyone have any issues withe seals? Third time I used this device when I pulled it out of my
tap one of the seals ripped, I use lube and wiggle as per the instructions, is there a trick to