Last Activity:02-22-2017 7:19 AM
Likes Given: 35
8 Likes on 7 Posts
Posted in thread: Any idea what my tare weight is? on 02-16-2017 at 05:42 PM
Can't help you with the Tare weight, but I can tell you what most of the other stamps on the
tank refer to. The DOT 3AA ..2015 means that the tank is a seamless steel tank, in accordance
with the Dept...
Posted in thread: "Northeast" style IPA on 02-16-2017 at 04:29 PM
With BIAB, when are you adding these?I add mine right as I initially heat up the water.
Posted in thread: Live BIAB on 02-16-2017 at 01:43 PM
Glad you got the thermometer worked out, I just ordered these for my BIAB: for your initial
target temp - be very wary of online calculators unless they are BIAB specific. I use BeerSmith
and just re...
Posted in thread: Dry Hopping Options on 02-16-2017 at 01:24 PM
I've tried a lot of things, and ultimately didn't want to add a lot of unnecessary steps (like
secondary fermentation in a carboy). My advice is to do your primary in a large bottling bucket
and toss ...
Posted in thread: Lower reading on secondary regulator on 02-11-2017 at 10:20 PM
Taprite advises their secondary regulators have a minimum differential pressure of 5 psi.Thus,
if you're running, say, 12 psi on the primary side, the highest pressure the secondary is
guaranteed to "...
Posted in thread: Lower reading on secondary regulator on 02-11-2017 at 08:57 PM
I just got my first secondary regulator so I can serve some beers at a slightly lower
carbonation. I just finished hooking it up and did a leak test. The reading on the secondary
reg is a good 3-4 psi...
Posted in thread: Any idea what my tare weight is? on 02-06-2017 at 02:51 PM
Nice, that helps. My tank is shorter than the 15# listed there by a few inches, but if that
ballpark is 25# than I should be good for a while longer. Will want to swap this guy out for a
tank with an ...
Posted in thread: Any idea what my tare weight is? on 02-05-2017 at 07:29 PM
Can you double check that link? It doesn't load for me.
Posted in thread: Any idea what my tare weight is? on 02-05-2017 at 06:27 PM
I got this tank in a swap out program at welding supply shop - and am trying to figure out if
it is almost empty or not. I don't see a TW though, so not really sure how to estimate what is
left. It cu...
Posted in thread: Thinking to get a new kettle... on 01-25-2017 at 01:24 PM
I just ordered this one for kitchen brewing, as I should be able to straddle two burners. The
price is definitely right.