Last Activity:08-21-2014 9:28 AM
Likes Given: 6
12 Likes on 9 Posts
Posted in thread: Pricing on EJ Beverage Beer and Gas Line Complete Coversion Kit on 08-21-2014 at 02:28 PM
i'm going to install the EJ Ultra Barrier tonight like this: 20' on one tap and 15' on the
other tap so I'll be able to compare. if it's too slow, i'll chop it down to size. i've got a
saison ready to...
Posted in thread: Pricing on EJ Beverage Beer and Gas Line Complete Coversion Kit on 08-20-2014 at 09:26 PM
I have 35' of the EJ arriving today for my two taps. Not sure how much line I should install
for each tap.Josh at keg connection said the resistance is the same as with vinyl line, and
that you should...
Posted in thread: Pricing on EJ Beverage Beer and Gas Line Complete Coversion Kit on 08-14-2014 at 11:22 PM
I'm about to update my original draft lines, which came with my tower kit – 5' vinyl 3/16" bev
line. I'm confused. First, I was gonna go 10' of the same line, then I started reading about
Posted in thread: Small batch BIAB or MT on 08-05-2014 at 11:48 AM
I agree about the forum style, but those guys invented BIAB and are super helpful. If you can
stand to read a few of their introduction posts and get a hold of the BACUS, it would only be
helpful for ...
Posted in thread: Farmhouse IPA on 08-04-2014 at 11:00 PM
you probably won't get much 'sweetness' at all if 3711 is involved. if you keg, couldn't you
just package it when it's at your desired FG? that should be pretty fast with 3711, including
Posted in thread: Small batch BIAB or MT on 08-01-2014 at 03:18 PM
I always run my recipe through BIABacus Calculator from biabrewer.info and it scales the amount
of grain needed for your OG, and also outputs the required water volumes automatically. If
Posted in thread: Small batch BIAB or MT on 08-01-2014 at 12:37 AM
it's really easy to make a bag yourself that custom fits your kettle. use swiss voile fabric
from a fabric store. it's 100% polyester. in the end, your kettle should be able to fit inside
your bag. id...
Posted in thread: Small batch BIAB or MT on 07-31-2014 at 09:55 PM
The BIAB method is about simplicity. You don't need to sparge. The mash is a lot thinner than a
traditional mash, and that helps with your efficiency. You may want to mash a little longer,
and stir, b...
Posted in thread: breaking bottles with my capper / broken ? on 07-31-2014 at 08:33 PM
Thanks guys, I'm going to pay more attention to the seating of the pinchers and make sure it's
under the lip just enough.
Posted in thread: Small batch BIAB or MT on 07-31-2014 at 08:16 PM
Definitely BIAB. I took first place at NHC 2014 finals for category 7 with a Dusseldorf Altbier
and I only BIAB. Just make sure your kettle is large enough to full volume mash, and check out