- Posts 4
Last Activity:02-04-2013 11:00 PM
Posted in thread: My Automated E-Herms Build (LabJack) on 01-14-2010 at 11:59 PM
Noticed a couple items I can comment on related to the LabJack U3.I was under the impression
that the Digital I/O lines could only supply 3.3V and you are switching a 4-32V SSR without
Posted in thread: LabJack hardware costs on 11-16-2009 at 08:22 PM
The amp is needed for thermocouples with the U3. If you use a silicon type sensor (e.g. LM34)
instead, then you don't need an amp.We had suggested the LM34CZ or LM34DZ from Jameco for $5 or
$2 each, o...
Posted in thread: Labjack brewing software on 09-09-2009 at 07:55 PM
To make your own temperature probes, consider using the LM34 from national.com or digikey.com.
It is hard to beat for accuracy, cost, and ease of use. When you are using a voltage
Posted in thread: Deep Six Brewing System - v2.0 on 09-15-2008 at 10:55 PM
Have you taken a look at the LAB-Tick amplifier board for the Ph probe?, looks like the input
impedance would work, just need to bias the Ph probe with +2.5 V to get full range output. As
to probe mai...