Last Activity:11-20-2013 1:27 AM
Age:29 years old
1 Likes on 1 Posts
Posted in thread: I want my power to plug into my kettle, not the other way around... on 09-08-2013 at 07:53 PM
According to the specs on the Switchcrafts:Voltage Rating:1.5 kVCurrent Rating:50 AAnd holding
one next to one of the many Neutriks I have, they *feel* about the same.. ("Is it heavy? Then
Posted in thread: Fermentation Chamber build on 04-07-2013 at 12:19 AM
I've used my chamber for a few brews now and have not had any issues with the beers being
skunked. Those reptile bulbs are infrared and don't put out UVA or UVB spectrums, which would
be responsible f...
Posted in thread: Imperial Milk Stout recipe idea on 01-23-2013 at 11:22 PM
I was thinking about brewing up an Imperial Milk Stout this weekend and I wanted to get some
thoughts on the recipe I came up with using BeerAlchemy.Size: 5.5 Gallons at pitchingOG:
Posted in thread: help wiring stc-1000 inside fridge on 01-21-2013 at 06:14 AM
If brown is the hot wire for the compressor then you would be correct. Just make sure you wire
the neutral wires together and don't forget the green wire for your ground.
Posted in thread: ebay aquarium temp controller build on 01-18-2013 at 09:50 PM
Here is my build. I used Neutrik PowerCon connectors for it because I had a few of them lying
around and I like serviceable locking connectors. 95162951599516195160
Posted in thread: Fermentation Chamber build on 01-18-2013 at 09:45 PM
I finished the the controller Monday night and everything is working great. Holding temp
steadily and it didn't take much calibrating to match the probe, which is submerged in water in
a white labs vi...
Posted in thread: Fermentation Chamber build on 01-13-2013 at 05:38 AM
I finished running the power to a new quad outlet on the other side of the cellar, where the
workbench and chamber are located. So I was able to test each side of the chamber just to make
sure my wiri...
Posted in thread: Fermentation Chamber build on 01-12-2013 at 06:35 PM
I still don't understand why people do this. You are adding the smallest amount of thermal mass
to your temp sensor. You are better off taping the probe to the side of a carboy and covering
that with ...
Posted in thread: Fermentation Chamber build on 01-12-2013 at 06:31 PM
Wrong answer, you still need to get some fermenting beer in there!:mug:Yes of course! How could
I have forgotten ;)
Posted in thread: Fermentation Chamber build on 01-12-2013 at 08:05 AM
Yesterday I had to work so I wasn't able to get much done on this project. So today I went at
it hard and managed to get it 98% done.Here the racks, refrigerator unit, fan and light socket
for the hea...