Last Activity:07-24-2014 7:53 PM
Likes Given: 19
1 Likes on 1 Posts
Posted in thread: Carbonic acid on 03-05-2014 at 01:32 AM
Question for you chemistry guys.Carbonic acid is produced when the beer is carbonated.What if
you lose carbonation and re-carbonate does the acid level increase?Put another way if the
Posted in thread: Beer candied bacon on 01-24-2014 at 10:09 PM
Made it a few weeks ago. I used Creme Brule Imperial Stout.
Posted in thread: carbonation level on 01-03-2014 at 10:14 PM
Hello all,I've never carbonated a wine and wondered what level of carbonation would be
appropriate for a Moscoto.I've done plenty of beer but didn't know if wine was better at
different volumes of Co2...
Posted in thread: Jalapeņo Beer? on 11-16-2013 at 12:39 AM
Recipe Volume: 5 Boil time/quantity: 90 / 7 Recipe OG = 1.085 @65% efficiency Calculated
Original Gravity = 1.088 Recipe IBU = 25 Calculated IBUs = 26.2 Recipe Final Gravity = 1.021
Calculated FG = 1....
Posted in thread: Oysters! on 11-28-2012 at 09:30 PM
Makes 18 Drago's Charbroiled OystersPrep Time: 15 minutesCook Time: 5 minutesTotal Time: 20
minutesIngredients:•8 ounces (2 sticks) softened butter •2 tablespoons finely
chopped garlic ...
Posted in thread: Co2 regulator problem on 11-04-2012 at 01:18 AM
It is a Taprite and I do have check valves.I've never had one of these apart.I'll give it a
Posted in thread: Co2 regulator problem on 11-04-2012 at 01:09 AM
It wasn't but is now since the regulator creeped up.So I shut of the valves to the kegs and
turned the regulator back.I'd wait till the kegs ran low on pressure before turning the valves
back on.Yes I...
Posted in thread: Co2 regulator problem on 11-03-2012 at 07:49 PM
Outside the fridge.It's been stable for years but now is not.
Posted in thread: Co2 regulator problem on 11-03-2012 at 05:47 PM
Hmmm, Good thought but the room temp is stable.
Posted in thread: Co2 regulator problem on 11-03-2012 at 02:31 AM
Hey guys,Anyone have trouble like I am with my Co2 regulator?For a long time it's been fine,
but lately it's started to creep up on it's own.I'll back it down again and it will be up a few
psi when I ...