Last Activity:11-04-2015 4:58 AM
Likes Given: 2
5 Likes on 4 Posts
Posted in thread: Brewtarget 1.2.4 - Free Brewing Software on 09-21-2012 at 10:30 AM
Excellent news. Looking forward to the next release!
Posted in thread: Brewtarget 1.2.4 - Free Brewing Software on 09-19-2012 at 10:27 PM
I finally got around to testing this software and I must say, I quite like it! After getting my
equipment profile set up and going through the tutorial, I brewed a batch and was able to hit
all of my ...
Posted in thread: Boulevard Brewing 80 Acre clone??? on 09-17-2012 at 10:05 PM
Apparently the aroma hops are:whirlpool: cascadedry hop: cascade and nelson sauvinSee the
bottom of the post here:
Posted in thread: Corona Mill - Ideal Drill on 09-03-2012 at 04:38 PM
Your best bet is one advertised as low speed and high torque. It's all about the torque. I
burned out a couple of cheap high speed, low torque drills that I had lying around before I
broke down and ...
Posted in thread: Best way to use Temp Control probe on 08-29-2012 at 11:21 PM
Even better, though, would be to just plug your keezer into the controller you do have, and
tape its probe to the vessel wall, then insulate. Now your controller is controlling the temp
of the ferm. S...
Posted in thread: Best way to use Temp Control probe on 08-17-2012 at 07:52 PM
Did you insulate the probe, or was it just taped against the glass container?Also, I'm
confused. Is your plan to have the freezer running at 40F while the FermWrap keeps the beer at
Posted in thread: WhirlFloc Stole My Wort on 07-30-2012 at 08:45 PM
I think the issues is that he added too much water to bring his batch up to 5 gallons because
the proteins the Whirlfloc coagulated scared him.Poor that into your fermenter next time, just
stop when y...
Posted in thread: WhirlFloc Stole My Wort on 07-30-2012 at 08:21 PM
what temperature was it when you measured the gravity? I could be wrong on this, but
hydrometers are calibrated for a certain temperature, usually around room temp.Good point.
Also, how well did you s...
Posted in thread: WhirlFloc Stole My Wort on 07-30-2012 at 07:48 PM
did you check your preboil gravity? possible that you didn't get as high of efficiency as you
were predictingif you didn't boil off enough water your gravity would be lower with a higher
Posted in thread: Kettle valve screen on 07-27-2012 at 09:20 PM
Drawtap and Kuphish- Yeah, I would like to purchase a screen rather than make one. Don't get me
wrong, the kettle valve was easy but I think I will just pay for this one.I think the kettle