Last Activity:09-01-2013 1:56 PM
Posted in thread: Ball Lock Kegs (NOVA) on 09-21-2012 at 03:27 PM
Nice. I'll talk to some folks and be in touch in the next day or two.
Posted in thread: Ball Lock Kegs (NOVA) on 09-21-2012 at 02:26 PM
How many are available? It may be worth driving up from Richmond if I can get a couple other
people here to go in on it with me.
Posted in thread: MiniBrew 14 Gal Conical Setup - NoVA on 06-13-2012 at 05:56 PM
Still available? I'm interested and will likely be in McLean visiting family in the near
Posted in thread: Fastening gas pipe to Brutus 10 on 01-19-2012 at 09:45 PM
Line the inside with a piece of silicone mat cut to fit and use self tapping stainless screws.
I just came up with with this solution for a similar problem yesterday and felt like such a
genius. Oh w...
Posted in thread: Cooler mash tun, false bottom size? on 10-13-2011 at 08:22 PM
I have a 5 gallon cooler and am thinking that it's time to step up to 10 gallons. I'd rather
not buy a new bottom or parts for a braid at the moment, so I'm thinking I can just swap the
false bottom f...
Posted in thread: Partial Mash Question - mash temperature too high, low O.G.? on 03-15-2011 at 08:12 PM
Just to follow up, I ended up buying a 5 gal cooler with a false bottom and have been using
that to make "big" partial mashes (20 - 30% of the fermentables are coming from extract, the
rest from grain...
Posted in thread: Partial Mash Question - mash temperature too high, low O.G.? on 08-16-2010 at 07:25 PM
Oops, sorry. That should have read 2.5 lb. 2-row pale malt.I'll try the heating up a pot next
time around and see how it goes.
Posted in thread: Partial Mash Question - mash temperature too high, low O.G.? on 08-16-2010 at 06:04 PM
It was at 68 when I took the reading, so even after correcting for temperature it was pretty
far off. I tested the hydrometer in 70 tap water today and it read 1.002 (uncorrected), which
struck me as ...
Posted in thread: Partial Mash Question - mash temperature too high, low O.G.? on 08-16-2010 at 01:46 PM
Long-time lurker, first-time poster here. I started brewing PM batches a few months back after
brewing extract for over a year, the first two batches were kits from AHS and they came out
great. Once I...