Gift Premium Subscription To Kord78

Join Date:


Last Activity:

03-16-2013 12:31 PM


  • Ask if you wanna know.
  • Tinkering,learning,and much much more
  • IT System Support
  • Pagano
  • I like it all sans country and musicals
  • Not into horror, gore-fests. Comedies can be ok.
  • Science or learning based shows. Three sheets is good. Syfy channel is good.
  • HP Lovecraft books, beer and distilling books.
  • Started homebrewing in 2009 - jumped into the deep end, no kiddie pool :) I love the process, the science, and the tinkering involved. I have since built 2 keggles and am in the process of building a keezer (3/2011 - I'll post about that). The last beer that I did up - about beginning of January, is the first one that I came up with myself; it is a robust coconut port. I have tweaked some can recipes that have turned out interesting.
  • I plan on nailing down my personal Robust coconut porter recipe. My next beer is a Double Chocolate Stout Clone. After that I may do a wit and move into some lagers, though I need to figure out how I'll do it as the tempuratures in my house will become an issue.
  • Robust Cocnut Porter
  • English Bitter, Black IPA, Belgian-i-fied Irish Stout (it's good), Irish stout
  • Robust Coconut Porter
  • Male
  • Single
  • Manchester
  • Connecticut


  • Posted in thread: Wiring up my Ranco? on 01-26-2012 at 11:55 AM
    Glad it helped :) Though I actually went to a most cheaper (in price) solution as I thought the
    Ranco was a bit too costly. The one (well, three now actually :) ) is 25$ and work a treat.
    Still have t...

  • Posted in thread: Building a Gas Manifold on 01-06-2012 at 08:44 PM
    With regards to #4 - do they make a motorized needle control valve for this purpose??

  • Posted in thread: Building a Gas Manifold on 01-06-2012 at 08:43 PM
    Hiya all!So I have been kicking around the idea of building my own LP gas manifold; here is
    what I have so far:1) I want to use 1" square tube for the manifold - (I posted a question
    about this in ano...

  • Posted in thread: Propane valves and a sealed gas tube on 01-06-2012 at 08:26 PM
    OK, a little more info on that OHG? What type of tubing would you suggest?I am seeing tons of
    people using square tube - bunches of threads, the Brutus system uses square tube, etc.Thanks!

  • Posted in thread: Propane valves and a sealed gas tube on 01-04-2012 at 05:05 PM
    Morning all!I need some help here as I am trying to figure out how to make a sealed square tube
    for propane dispersion to two honeywell valves. So what I need to know is:- What size/type
    input port to...

  • Added a new Photo on 01/04/2012

  • Posted in thread: Carboy/ Keg Cleaner Giveaway on 06-22-2011 at 11:52 AM
    After watching the video (and knowing how lazy I am :) ), I'm definitely throwing my hat in on
    this one!

  • Posted in thread: Keezer Temperature Issues on 06-14-2011 at 12:23 AM
    Well, that went from no activity to blow out real quick!!So I had initially planned to remove
    the inner goo from one of those liquid ice pack thingies and put that in like a peanut butter
    jar and imme...

  • Posted in thread: Keezer Temperature Issues on 06-09-2011 at 05:05 PM
    OK, so here is the final post on this matter:Building a keezer is all fun and games and
    what-not, but one must note that there are some caviats to it with the primary one being - do
    not test run the f...

  • Posted in thread: Wiring up my Ranco? on 04-13-2011 at 08:40 PM
    Green is ground, yes. The other colors may be black/yellow or black/white.