Last Activity:12-12-2014 2:59 PM
18 Likes on 9 Posts
Posted in thread: How do i get a temp. probe into a fermenter? on 11-10-2013 at 03:31 PM
Use some sort of beerhose and put the sensorin the hose:
Posted in thread: Peltier TEC Carboy Cooler on 11-10-2013 at 07:50 AM
But that would assume you allways need to cool the system? What if you want to heat the
system?If I meassure the temperature of my wort direct by inserting a DS18B20 into the vessel,
it is not allways...
Posted in thread: Peltier TEC Carboy Cooler on 11-09-2013 at 07:11 AM
The pics i posted shows a 1-wire DS18B20 sensor connected to the RPi. I plan to connect 2 more
2 sensors, 1 for ambient and one for the waterreservoir. My waterreservoir is about 4 to 5
liters big, an...
Posted in thread: Should I Dump This Trub Before Pitching on 11-08-2013 at 10:49 AM
Since you have 2 of them, dump one and keep one. After it's finished, taste the difference :)
Posted in thread: Peltier TEC Carboy Cooler on 11-07-2013 at 04:42 PM
I made something like that for my same project:
Posted in thread: Peltier TEC Carboy Cooler on 11-03-2013 at 09:59 AM
Interesting :)I'm also working on a peltier cooled fermentor, but I want to pump the cooling
water through a cooling spiral which is hanging directly in the wort.
Posted in thread: IKEA 3-Tier Shelf on 10-26-2013 at 08:35 AM
I have that Ikea part in our childrens playroom. If I remember correctdly, these are made to
hold the weight of a child, so they can climb on it.
Posted in thread: Motorized Grain Mills: Time to show them off! on 10-20-2013 at 07:57 AM
I have a chinese maltmill, build into a kicthendrawer :[ame] kitchen is build in my
Posted in thread: Recirculating waterchiller for temp controlled fermentation on 02-17-2013 at 08:22 AM
Next morning: stable at 20 degrees :)I turned off the chiller for 45 minutes, and the water
allready droppen 1 degree (the room temp is 14, the water was 20).So I gues the chiller is
doing allright :D...
Posted in thread: Recirculating waterchiller for temp controlled fermentation on 02-16-2013 at 08:50 PM
Doing a testrun right now, and it works like a charm.Dropped the temp of 30+ liters water from
25 to the desired 20 degrees in about 2 hours, and is setting at 20 since then (room temp is 15