Gift Premium Subscription To knuckleheadbrewing

Join Date:


Last Activity:

12-29-2014 2:38 PM

Likes Given: 35

27 Likes on 21 Posts 


  • Female
  • Single
  • North Georgia
  • GA


  • Posted in thread: End of Year Brew on 12-28-2014 at 02:45 PM
    I would go for an old ale-ish brew.MO,10% C60, 5%chocolate malt and 2-3% roasted barley.OG of
    about 1.075-1.080.Ferment with Scottish ale yeast.Bitter to about 40ibu @60 and add a little at
    20, all Wi...

  • Posted in thread: End of Year Brew on 12-27-2014 at 08:10 PM
    So i'm looking up things to brew. This is what I have on hand. 2 Row 50lbMarris Otter50lbVeinna
    Malt 2lbCrystal 60*L2lbCrispt Chocolate Malt2lbHoney Malt 2lbSpecial B 2lbBelgian
    Biscuit2lbRoasted Barl...

  • Posted in thread: 3 batches in 1 day on 05-05-2014 at 07:43 PM
    Missed HB day, But the Fourth Was With Me on Sunday for the Red IPA I brewed!

  • Posted in thread: how much should a co2 refill cost? on 04-16-2014 at 06:26 PM
    Woah! 50lb (do you mean 50 cu ft?). How big is that cylinder?I just bought a 15lb yesterday.
    The place I go for refills charges 24 for 5lb/ 26 for 10lb/ and 28 for 15lbI was worried that
    15lb would ev...

  • Posted in thread: PID Controller Help on 04-15-2014 at 08:54 PM
    It doesn't appear your unit is reconfigurable with respect to type of input and RTD parameters
    so the RTD you use must match the one you took out. One thing I notice with the manual is that
    the RTD is...

  • Posted in thread: PID Controller Help on 04-15-2014 at 04:58 PM
    Lacking an English manual I would try to hack through the device's config menu and determine if
    you can reconfigure for an RTD by selecting a different temp input. Finding the "menu" can be
    hard - try...

  • Posted in thread: PID Controller Help on 04-15-2014 at 03:29 PM
    Yes I have found that doc as well, but if you look at my pics, and compare to that doc it shows
    the XMTA-8000 to have 24pins and mine clearly has 16. So i do not believe that document is
    accurate, at ...

  • Posted in thread: PID Controller Help on 04-15-2014 at 12:26 PM
    Yeah I saw that as well, but it doesn't make sense that the back of the controller has a
    section to wire up an RTD probe on pins 14,15,16.....2 reds and 1 white. So I believe I have a
    correct prbe, bu...

  • Posted in thread: PID Controller Help on 04-14-2014 at 10:31 PM
    I am running a RIMS system with a TDWK XMTA-8000 Temp controller (first pic.) The original temp
    probe with the system broke (the wire) and I replaced it with an Auber 4" probe ( with the
    deluxe quick...

  • Posted in thread: Everyone knows hydrometers are fragile.... on 04-10-2014 at 07:41 PM
    I've had them break the same way....I swear I didn't grab it that hard.....LOL

Knucklehead Brewing Co. Tap 1: Imperial Stout Tap 2: Winter Warmer Fermenter 1: Sado Hopicuss IPA Fermenter 2:

Newest Threads