Gift Premium Subscription To kklowell

Join Date:


Last Activity:

02-03-2012 3:52 AM

1 Likes on 1 Posts 


  • Got into home brewing several years ago when my son bought me a True Brew setup. Have since expanded to a 3-tier setup, which I sold when I lost interest. About one month later the fever hit again and I made a 3 gallon BIB setup. Now, after another few months break, I'm working on a RIMS setup.
  • More brews
  • Nothing
  • Snowy Mountain APA
  • Snowy Mountain APA
  • Married
  • Lowell
  • MA


  • Posted in thread: PID wiring question on 02-02-2012 at 11:19 AM
    Thanks for the info.... I hadn't a freaking clue and the diagram isn't entirely understandable.

  • Posted in thread: PID wiring question on 02-02-2012 at 01:32 AM
    I have a Sestos D1S-VR PID. My thermocouples are K-type, and my question is simply....do the
    two thermocouple wires got to terminals 3 and 4? Does it matter which wire goes where?The wife
    wants this o...

  • Posted in thread: Thought I could do it, but need your help on 01-28-2012 at 02:04 PM
    What about using a small freezer and putting rv antifreeze in your water? You'd have a greater
    temp differential then. Also, if you don't want the antifreeze solution around your kegs (rv
    antifreeze i...

  • Posted in thread: Fail. on 01-15-2012 at 03:13 PM
    Yep...but I was distracted at that moment by the uh, uh, marching band...yeah, that's it,
    marching band...passing through the room at just that moment and didn't catch all the smoke. I
    thought I might...

  • Posted in thread: Fail. on 01-15-2012 at 02:57 PM
    It's a TLC555. Going to get a different one this time, but still a 555. Do you have a link to
    the schematic you used? Maybe I would try that route.

  • Posted in thread: Fail. on 01-15-2012 at 12:33 PM
    pulse width modulatorRadio Shack

  • Posted in thread: Fail. on 01-15-2012 at 05:16 AM
    Well, my first attempt at making my PWM resulted in releasing the magic smoke from the IC. We
    all know that once the smoke is out it's all over so it'll be off to RS from another one
    tomorrow for atte...

  • Posted in thread: PWM..Show us How on 01-10-2012 at 02:48 AM
    I need some help with that circuitbee.com schematic... there seems to be a wire from the 12+,
    through the IC to the GRD....really? I have the parts and want to put this thing together and
    in the contr...

  • Posted in thread: Copycat Keezer on 01-08-2012 at 11:40 PM
    Very nice looking. Wish I could "copy" that well! :)

  • Posted in thread: PWM..Show us How on 01-07-2012 at 02:08 PM
    I've been reading this entire thread and am about ready to jump in the car and go buy the parts
    necessary to build one of these too, but have been hoping that somewhere in the thread someone
    would pos...

Following Stats

Newest Threads