Last Activity:10-28-2006 3:17 PM
Posted in thread: kegging cola on 08-29-2006 at 03:44 AM
Most soda, like Coke for example, is carbonated to about 3.7 volumes of CO2. At 40˚F, that
is about 25 psi. And yes, you will need at least 20' of 3/16" ID thick walled beverage tubing
Posted in thread: kegging cola on 08-28-2006 at 01:18 AM
it does have some carbination, but not nearly enough, if i need to let it sit longer i willwhat
is the standard carbination pressure of cola?there is definatly a TON of pressure in the keg,
the cola c...
Posted in thread: kegging cola on 08-27-2006 at 04:38 PM
I wasnt sure where to place this question, so if it is in the incorrect location, my apologiesI
bought cola extraxt, and followed the instructions, and the 4 gallons of cola have been sitting
in the r...
Posted in thread: is there Homebrew supply store etiquette? on 08-13-2006 at 07:24 PM
RYANME, Where do you live? You'd be surprised, there may be someone here that lives near you
that could recommend a home brew store.I am a big fan of the local home brew store simply
because my experi...
Posted in thread: remote tap setup on 07-11-2006 at 10:48 PM
i had thought of that, i wasnt sure how it would help, does it have a lower freezing point than
antifreeze? Does it conduct heat better?
Posted in thread: remote tap setup on 07-11-2006 at 02:41 AM
Good luck. Remember that most places (commercial places, that is) have glycerin-cooled systems
to keep their lines cool between the kegs and the taps. What you are doing is an open
invitation to foami...
Posted in thread: remote tap setup on 07-10-2006 at 11:19 PM
my lines are 7' total, 4 feet are outside of the keg. the serving pressure is 12 psi
Posted in thread: remote tap setup on 07-10-2006 at 12:43 AM
well i did the water pump setup, i will se how it goes, i put a bunch of ice in it to get it
cooled down initially and also wrapped the lines in fiberglass.....if any one has any ideas
please let me k...
Posted in thread: remote tap setup on 07-09-2006 at 04:16 AM
btw, here is a pic of the tap setup
Posted in thread: remote tap setup on 07-09-2006 at 04:15 AM
Hello all - I currently have 4 kegs on picnic taps right now in the garage. i got tierd of
going out to the garage to fill my beer ( i know i am so lazy)So i bought a tap setup. I was
wondering if i r...
- What are you drinking now?
- Fermentation temperatures: give me details!
- Craft Beer MAW
- 1-Gallon Brewers UNITE!
- I f*****d up!
- Man, I love Apfelwein
- Parts needed??
- Is siphoning from carboy to bottling bucket enough to mix priming water?
- whats wrong
- Carpentry and assemble of keezer trim
- chest freezer/fermentation chamber high temp variance