VIEW MY

kinggoo

Gift Premium Subscription To kinggoo

Join Date:

03-08-2010

Last Activity:

05-11-2014 12:31 AM

Likes Given: 1

    ABOUT ME

  • Green Bay
  • Single

LATEST ACTIVITY

  • Posted in thread: Removing chloramine and inline sparging on 05-11-2014 at 05:09 AM
    So, I will try and keep this as brief as possible while providing good information. My system
    is configured as follows:2 kegs. One as a MLT/strike water and the other as boil.I have two
    pumps, and rec...

  • Posted in thread: RIMS: Can not sparge and mash. It's one or the other. on 04-13-2013 at 03:43 PM
    I had success this morning running a water test for mashing and sparging with the same PID
    values after:1. Relocating temperature probe to the middle of the tube.2. Changing my fresh
    water source to a...

  • Posted in thread: RIMS inline water heating question on 04-13-2013 at 03:41 PM
    I had success this morning running a water test for mashing and sparging with the same PID
    values after:1. Relocating temperature probe to the middle of the tube.2. Changing my fresh
    water source to a...

  • Posted in thread: RIMS: Can not sparge and mash. It's one or the other. on 04-12-2013 at 05:42 PM
    OK, so there were several things wrong with my configuration that I have since discovered.1.
    RTD Sensor was at the end of the tube, creating a lag in response times from the element to the
    sensor. I h...

  • Posted in thread: RIMS inline water heating question on 04-12-2013 at 05:13 PM
    I also apparently should have installed a ball valve on the RIMS outlet, to regulate the flow.
    i will be trying a butterfly valve as i am just fresh out of on-hand tri clamp ball valves. i
    was able to...

  • Posted in thread: RIMS inline water heating question on 04-11-2013 at 06:21 PM
    sounds like we are having the same exact problem, at the same time. My RIMS looks exactly like
    yours, except in tri-clamp form. Probe placement and in/outlets.we had a eureka moment this
    morning, and ...

  • Posted in thread: RIMS: Can not sparge and mash. It's one or the other. on 04-09-2013 at 03:46 PM
    It has come to my attention that the RIMS = vertical. This apparently does not work so well
    with sparging. Will be trying RIMS = horizontal this evening, and report my findings.

  • Posted in thread: RIMS: Can not sparge and mash. It's one or the other. on 04-09-2013 at 01:14 PM
    It is RIMS. See linked picture. I have one PID controlling the RIMS tube, one PID as a
    glorified thermometer in the mash tun, and one PID controlling an element in the BK.

  • Posted in thread: RIMS: Can not sparge and mash. It's one or the other. on 04-09-2013 at 12:51 PM
    Hello,So I have built myself an electric RIMS configuration. I'm using a 30amp Kal clone
    control panel built with the help of hbt user danbass. After going through my first batch, I
    was hit with some ...

  • Posted in thread: Oxyclean and off taste and smell on 09-28-2012 at 12:33 PM
    I definitely do sanitize after oxy.I use MAYBE a tablespoon, fill keg up to 3/4 of the way..
    shake it up, empty, and rinse. Then I add ~5gallons of starsan, empty that, and proceed to fill
    the keg wit...

0 COMMENTS
POST A COMMENT