Last Activity:01-11-2013 7:39 AM
Likes Given: 1
1 Likes on 1 Posts
Posted in thread: Kicked Two Kegs On One Night...Again! on 11-23-2010 at 04:46 PM
I hate when that happens. I do the same thing where I drink down evenly but I usually have at
least one to throw back in right away.
Posted in thread: 24hrs, no bubbles, getting nervous..... on 07-05-2010 at 08:36 PM
Ive had Montrachet take up to three days to show signs of an active (bubbly) fermentation. Just
sit tight and it will eventually do its thing.
Posted in thread: I strongly dislike my regulator right now on 06-27-2010 at 07:07 PM
Whenever I put in a 'problem' keg or hook up a new bottle of CO2 I close the check valve going
to all the kegs and burp the regulator and see where the needle settles. Then I open up all the
Posted in thread: Bored Saturday=Shiny Corny on 06-27-2010 at 07:00 PM
Ive been doing that to mine but I use an angle grinder with the gator grit pads to get all the
glue off and a buffing pad for the polish.Much faster than that handheld buffer but I dont have
one of th...
Posted in thread: A Lesson in Impatience on 06-18-2010 at 09:13 PM
This is my go to beer and I brew it every other weekend.I usually leave mine in the carboy
until the yeast drops out on its own and I can basically see through it. I naturally carb mine
in a corny tho...
Posted in thread: corny question on 05-31-2010 at 12:46 AM
I use an angle grinder with gatorgrit polishing disks to take off stickers and get them nice
and shiny. Dont use an actual abrasive cutting/grinding disk though unless you want holes in
Posted in thread: Best place to buy perlick 525ss? on 04-02-2010 at 11:04 AM
I got my first one on ebay (they included the handle) for cheaper than most of the online
stores without a handle.
Posted in thread: Cancer-Free Hose Fittings on 03-31-2010 at 10:45 AM
My lawn mower has a sticker on it that says its not for sale in Calfornia but Ill bet ten
dollars it still does the same job as the same model that they do sell in Cali.If its a brass
fitting then do ...
Posted in thread: Different Perlick's on 03-25-2010 at 04:42 PM
The creamer faucet is used when your pour does not have enough head for your liking. You push
the tap backwards past its 'stop flowing' point and it opens a tiny orifice that allows the
beer to come t...
Posted in thread: Perlick Group Buy on 03-24-2010 at 10:17 PM
Guess what was in my mailbox today!!!!!Thanks Jeff. My keggerator wants you to know that "You