Last Activity:04-11-2012 4:17 PM
Posted in thread: Show us your sculpture or brew rig on 03-04-2011 at 08:18 PM
I just watch the temp on the mash and adjust accordingly. The coil is there to maintain the
mash temp. When I start a brew day I fire up the burners under the MT and the HLT Once I hit
the dough in te...
Posted in thread: Show us your sculpture or brew rig on 02-17-2011 at 10:25 PM
I sued to have a coil in my boil kettle and another coil in a bucket of ice water. The tap
water would run through the coil in ice water first so the water going into the boil kettle
coil was chilled ...
Posted in thread: Show us your sculpture or brew rig on 02-17-2011 at 08:18 PM
Here are some specs:Natural gas via gas tube.23 jet burnerstri-clover fittingscustom rigid
stainless linesSelf designed hybrid heater/cooler coilkeyed power switch to pumpsilluminated
pump switches (r...
Posted in thread: CarPort Brewery - She Brews! on 02-01-2011 at 07:55 PM
Very cool! Great use of space.
Posted in thread: CarPort Brewery - She Brews! on 02-01-2011 at 01:08 AM
How about some pics?
Posted in thread: Would this be a good HLT Deal? on 01-21-2011 at 03:50 AM
It might be kind of small but have you looked at those 1 kettle all grain ideas in the forums?
If you change the valve like you said it might be perfect!
Posted in thread: Counterflow Chiller on 01-21-2011 at 03:44 AM
I used to use something like that. I would suggest securing the coils together (ziptie maybe)
and using a bag for your hops. The wort line is a thin one and brewers tend to feed it by
gravity. A clogg...
Posted in thread: Am I going to burn my house down? on 01-21-2011 at 03:41 AM
You're fine. Hope it works for ya.
Posted in thread: Cleaning/draining a complete 3 keg brewery on 01-21-2011 at 01:04 AM
Take a look at your plumbing lines. I bet if you changed out a handful of screwed fittings you
could still partially take it apart. If you do decide to go permanent then Ridged and Husky
both have a 2...
Posted in thread: Blichmann 15 Gallon Kettle on 01-20-2011 at 10:22 PM
I dig those valves...