Gift Premium Subscription To keithsipa

Join Date:


Last Activity:

03-15-2011 2:07 PM

2 Likes on 2 Posts 


  • halifax
  • Female
  • Single


  • Posted in thread: Why can't I get the gas line off my keg? on 11-12-2009 at 08:27 PM
    I have done the CO2 to outlet many times for initial carbonation, what you didnt read, and if
    you pay attention to the color of the couplers in the tutorial, you would see that they used
    the liquid co...

  • Posted in thread: Kegging supplies in Canada on 11-02-2009 at 12:18 PM
    Has anyone bought from PN Tech or Simgo?I will second Simgo, great to deal with and resonably
    priced. They supply all of the retail wine and beer stores in my area with their kegging

  • Posted in thread: No one can fill my CO2 Tank...:( on 10-21-2009 at 06:02 PM
    Yeah, is cheaper in Quebec than it is here. And we have very little selection.Last
    time I was in NFLD I ended up drinking rum for the whole visit, about the only beer on the
    shelves was B...

  • Posted in thread: No one can fill my CO2 Tank...:( on 10-15-2009 at 11:08 PM
    Thanks to keithsipa, for another suggestion, but praxair can not full 5 pound tanks, but they
    can get me a 20 pound tank, but I have to set up a business account and rent the tank. I still
    have one op...

  • Posted in thread: HELP! Newb kegging Emergency!! on 10-05-2009 at 04:00 AM
    Is the Co2 washer the small plastic washer (not rubber) with grooves cut into it?There are
    atleast 2 different kinds:One is a nylon washer and the other is a rubber seal.

  • Posted in thread: HELP! Newb kegging Emergency!! on 10-05-2009 at 03:52 AM
    I just used teflon tape around the threads and haven't had a problem yet. Is there any reason
    to use one, or go w/ the if it ain't broke, don't fix it method.It is not the threads that seal
    the reg. t...

  • Posted in thread: Help with force carbonating - Is my beer ruined? on 10-01-2009 at 11:04 AM
    Hey guys, I have been homebrewing for a while and just got my corney keg and CO2 setup. I tried
    to force carbonate my beer today, so I applied pressure, shook up the beer in the corney keg,
    and let it...

  • Posted in thread: Help! New to Liquid Yeast on 09-30-2009 at 04:04 PM
    An update and progress report.After approximately 4 days with minimal fermentation (OG 1.052,
    SG 1.0.50), I aerated the brew thoroughly, then transferred the primary into a sealed carboy
    with a blow o...

  • Posted in thread: Life sucks - No Carbonation on 09-30-2009 at 11:38 AM
    If you went through a 5 pounder in 3 cornies, you definetly have a leak. Seal up the keg and
    hit it with 30 - 40psi to seal the lid, then do a leak test, go get a spray bottle and mix up a
    batch of so...

  • Posted in thread: Cheap n' rusty CO2 cylinder on 09-29-2009 at 10:25 PM
    !!! I'm going to St. FX on Friday, do you know when they close on Fridays or if they're open on
    Saturday? I'd be willing to go a little bit out of my way to exchange it if it doesn't pass
    hydro here i...