Last Activity:07-01-2014 3:15 AM
Likes Given: 3
1 Likes on 1 Posts
Posted in thread: Brewer's Hardware 15 Gallon Stainless Steel Conical Fermenter Giveaway! on 07-27-2013 at 02:35 AM
I am in.
Posted in thread: Over dry hopped? on 03-21-2013 at 05:28 AM
Do you guy usually dry hop while there is still krausen or wait until it drops?
Posted in thread: Boil volume on 03-09-2013 at 06:23 AM
A lot of this is too far into the weeds for extract brewing. If you mix a hopped LME with water
and add yeast, you'll make beer. Back to the OP, I'd categorically reject the idea of buying a
Posted in thread: Japan standard tank to US standard regulator? on 03-08-2013 at 11:54 PM
Hey CDCTwhere do you get the C02 from?I will get my wife to bring back a regulator from the
states when she goes over in a monththanks for all the info I dont speak japanese either but i
can get aroun...
Posted in thread: Boil volume on 03-05-2013 at 01:05 PM
I still say full boil but for different reasons now. Wow you learn something new every day! I
was operating off of old information I guess.
Posted in thread: Boil volume on 03-03-2013 at 10:18 PM
Especially when doing an iipa your aroma and flavor hops are very important. Even with a late
extract edition all of your end boil hops are going into a thick syrup that is detrimental to
Posted in thread: Boil volume on 03-03-2013 at 03:26 AM
If you have the opportunity to do a full boil, by all means do it. The hop utilization and
flavor difference is reason enough already, but the fact that your late malt editions can help
you achieve lo...
Posted in thread: Help Finding Co2 in Japan on 03-03-2013 at 02:12 AM
This message is a little late, but for OP and other Zama people (and Atsugi people if they are
searching as well), there is a GREAT liquor store a mile or less outside of the back gate on
Posted in thread: Japan standard tank to US standard regulator? on 03-02-2013 at 04:05 PM
UPDATE: The nut that CDCTX recommended worked beautifully. If anyone else even runs into this
problem remember that the local "Home Center" has the adapter you need.
Posted in thread: Japan standard tank to US standard regulator? on 03-02-2013 at 04:03 PM
Left hand thread? Normally it will have marks on the corners of the "nut" part indicating if it
is lht.Yeah, thanks for the advice, but I already knew it was left hand thread. I just didn't
have the p...