Last Activity:12-21-2014 6:22 PM
Likes Given: 1
2 Likes on 2 Posts
Posted in thread: 3/4" Camlock hose barb size on 06-20-2013 at 06:40 PM
Well I received my 3/4" camlocks from Proflow today. I took a few pictures for comparison. The
barb on them is very long with two barbs, I ended up taking the Dremel and trimming it down to
only 1 bar...
Posted in thread: 3/4" Camlock hose barb size on 06-17-2013 at 04:13 AM
OK thanks Bobby, I was hoping you'd chime in on this.
Posted in thread: 3/4" Camlock hose barb size on 06-16-2013 at 11:30 PM
Not going bigger on the whole system just on the cam locks connecting to the pump to eliminate
an extra fitting in the mix. Will post here as soon as I get them.
Posted in thread: 3/4" Camlock hose barb size on 06-16-2013 at 04:21 AM
Since no one has replied I think I will order the 3/4" camlocks Monday and test it for myself.
Will report back for anyone interested.
Posted in thread: 3/4" Camlock hose barb size on 06-14-2013 at 08:08 PM
Hey guys I have a Chugger center inlet pump with the 3/4" mnpt threads. I currently am using a
3/4" to 1/2" reducing coupling to 1/2" camlock. In an effort to reduce fittings and threads in
Posted in thread: Memorial Day Sale, HBT EXCLUSIVES!!! - Kegconnection.com on 05-27-2013 at 03:29 AM
Code please, thank you.
Posted in thread: Chiller idea on 02-28-2013 at 10:41 PM
Here's a two coil parallel chiller I built a while back. 50 ft of 3/8" with 5/8" down tubes I
believe they were. I regularly chill a 5 gal batch to 65 in about 7 to 7.5 minutes while
Posted in thread: Better Bottle Blow-off Bullcrap! on 11-03-2012 at 06:15 PM
I couldnt get a bung to stay in my better bottle either until I rinsed the star San off the
bung. Now I sanitize the bung and my hands then rinse with clean water and rub until no longer
Posted in thread: Braid -vs- False Bottom? on 11-03-2012 at 06:10 PM
I think mcmaster carr had the spring , but since I already had some ss .032 safety wire laying
around, I wrapped it around a wooden dowel till I had enough to fill up all the braid. I guess
it's not t...
Posted in thread: Yeast washing question on 07-13-2012 at 12:35 PM
Thanks for the quick reply bps