Last Activity:04-15-2014 10:15 PM
Posted in thread: First applejack....mmmmm on 05-15-2013 at 03:41 AM
The cider I made for this I used 2 gal AJ, 3 cups sugar, a few teaspoons nutrient, and
lavlin1118. It ended up up at 10.2%... Froze it 48 hrs. Let it thaw 1.5 hrs. Yielded 8, 6.8 oz
little bottles. Ho...
Posted in thread: First applejack....mmmmm on 05-15-2013 at 02:25 AM
It cut off part of my previous post. Also looking for thoughts on the best yeast used and best
temp. Was thinking about 1118 or K1-V1116 and fermenting at 67F +\- 2F.
Posted in thread: First applejack....mmmmm on 05-15-2013 at 02:23 AM
Also for recipe do you just mix apple cider and cane sugar. Is there any benefit to adding a
small amount of dry malt extract (like one pound in 6 gallons). Has anyone added oak to final
Posted in thread: Fermentation temp on 03-17-2013 at 03:02 AM
Tape it to the fermenter, or better, insulate it after taping it to the fermenter with some
styrofoam.I taped my loves temp prob to the outside of my fermenter (glass) an then taped a
neoprene coozie ...
Posted in thread: Recipe suggestion for old malt on 03-14-2013 at 12:16 PM
Maybe combine one can of extra light with the wheat & 1oz magnum for bittering & the willamette
for flavor. 1can extra light & one can light with 1/2lb carapils & 1lb vienna with 1oz magnum
Posted in thread: Recipe suggestion for old malt on 03-12-2013 at 11:02 PM
Found some old (1 year) liquid malt extract that I don't want to throw out looking for
suggestions for a recipe to use I in. I was thinking along the lines of an imperial IPA hoping
the heavy hop flav...
Posted in thread: Changing beer line on 10-16-2012 at 01:41 AM
Posted in thread: Changing beer line on 10-16-2012 at 01:29 AM
79668How do I take a beer tower apart. I can get the tap off and the spring out but how do I go
further. I want to replace my beer line. is there a special tool I need?ThanksJeremy
Posted in thread: Another TSS2 controller box build on 09-23-2012 at 03:38 PM
Thanks again, this has been a very informative thread. Jeremy
Posted in thread: Another TSS2 controller box build on 09-23-2012 at 03:18 AM
Thanks for the reply. One last question. If I leave all parameters the same, can I set sp1 to
any value and controller will control +/- 2 F. So if sp1 would be set to 64 would heat come on
at 62 & off...